Installation guide

SV-AP-PANEL Installation
SkyView System Installation Guide - Revision R 18-7
> FUNCTION: PITCH
We recommend that MOTOR 1 be configured to control PITCH trim - Table 62 above
reflects that MOTOR 1 is configured to control PITCH trim.
> QUICKEST TRIM SPEED
> TRIM MOTOR SPEED: xxx%
Set as appropriate for your aircraft’s performance.
> AT AND BELOW AIRSPEED: xxx KNOTS
Set as appropriate for your aircraft’s performance.
> SLOWEST TRIM SPEED
> TRIM MOTOR SPEED: xxx%
Set as appropriate for your aircraft’s performance.
> AT AND ABOVE AIRSPEED: xxx KNOTS
Set as appropriate for your aircraft’s performance.
> MOTOR 2 CONFIG:
> FUNCTION: ROLL
We recommend that MOTOR 2 be configured to control ROLL trim - Table 62 above
reflects that MOTOR 2 is configured to control ROLL trim.
> QUICKEST TRIM SPEED
> TRIM MOTOR SPEED: xxx%
Set as appropriate for your aircraft’s performance.
> AT AND BELOW AIRSPEED: xxx KNOTS
Set as appropriate for your aircraft’s performance.
> SLOWEST TRIM SPEED
> TRIM MOTOR SPEED: xxx%
Set as appropriate for your aircraft’s performance.
> AT AND ABOVE AIRSPEED: xxx KNOTS
Set as appropriate for your aircraft’s performance.
Post Installation Checks
 Verify buttons operate all AP modes.
 Verify dim commands from SkyView display dim the backlighting of the SV-AP-PANEL.
 Verify that trim controls operate as commanded from Pilot and (optional) Copilot
controls.