Installation guide

SkyView System Installation Guide - Revision R 20-1

20. Appendix A: Maintenance and Troubleshooting

This appendix provides builders, installers and technicians basic information regarding SkyView

maintenance and troubleshooting.

Dynon’s internet sites may provide more up-to-date information on maintenance and

troubleshooting than this document. The following sites should be used a reference:

 http://docs.dynonavionics.com – Dynon's documentation download area allows customers

(and prospective customers) to download the most up-to-date versions of all Dynon

documentation. Older versions of Dynon documentation may be shipped with OEM and

dealer-provided units, so it is a good idea to periodically check for new versions of

documentation.

 http://wiki.dynonavionics.com – Dynon’s Documentation Wiki provides additional technical

information on Dynon products.

 http://forum.dynonavionics.com – Dynon’s Online Customer Forum is a resource for Dynon

Avionics customers to discuss installation and operational issues relating to Dynon Avionics

products. The Forum is especially useful for pilots with uncommon aircraft or unusual

installation issues. For customers that cannot call Dynon Technical Support during our

normal business hours, the Forum is a convenient way to interact with Dynon Avionics

Technical Support. The Forum allows online sharing of wiring diagrams, photos, and other

types of electronic files.

Dynon Technical Support is available 7:00 AM–4:00 PM (Pacific Time) Monday – Friday. For

phone support, call +1(425) 402-0433. Email our tech support staff at

support@dynonavionics.com.

There are no user-serviceable parts (such as replaceable fuses) inside any SkyView

system unit. Refer all servicing to Dynon Avionics.

Taking a Screenshot

It is sometimes helpful to have a screenshot of a behavior to share with Dynon Technical

Support. To accomplish this:

 Insert a USB flash drive into your SkyView USB port.

 When you want to save a screenshot of the display, press buttons 2 and 7 on that display

simultaneously. SkyView will display a message indicating that a screenshot has been saved.

 The screenshot can be found in the “screenshots” folder on the USB flash drive when the

USB flash drive is connected to a computer.

Returning SkyView Components to Service after Repair

SkyView Network enabled components such as modules and servos are shipped in a “like new”

state after repair. To return a SkyView Network component to SkyView Network, follow the