Installation guide

SV-ADAHRS-200/201 Installation and Configuration
5-2 SkyView System Installation Guide - Revision R
Figure 24–Suggested SV-ADAHRS-200/201 Installation Procedure
Physical Installation
As previously mentioned in the System Planning Section, there are no module-to-
module proximity requirements when installing multiple SV-ADAHRS-200/201
modules in an aircraft. For example, one SV-ADAHRS-200/201 may be installed on
top of another SV-ADAHRS-200/201 module. Other installation location
requirements still apply.
The diagram below shows the important mounting dimensions of the ADAHRS module with
electronic and pneumatic connections. Note that the figure applies to both the SV-ADAHRS-200
and SV-ADAHRS-201 modules.
Figure 25–SV-ADAHRS-200/201 Mounting Dimensions with Electronic and Pneumatic Connections
Additional mounting location, orientation, and other installation requirements are described in
the System Planning section earlier in this manual. Please review this section when physically
installing your with SV-ADAHRS-200/201 module(s).
OAT Connector