User guide

SV-MAP-270 Navigation Mapping Software
SkyView Pilot’s User Guide - Revision Q 7-35
SkyView offers robust Flight Planning that allows navigation to a sequence of one or more
waypoints. Both of these methods are covered in the following sections.
Find an Airport or Navaid by Identifier
To find an airport or navaid, press MAP > INFO. A window like the one seen in Figure 99 will be
displayed.
Figure 99–Moving Map Info Window
When the Info window is first displayed it shows detailed information about the airport or
navaid that was most recently used or selected. From here, you can move the CURSR joystick
down to find the desired item by identifier, facility, or city*. To do this, move the CURSR joystick
up/down to move between identifier (top), facility name (middle), and city* (bottom) fields;
Once you have selected the field you wish to use to search, rotate the knob to change the
highlighted character. Move the joystick right to select the next character and continue until
the desired facility is shown.
Alternatively, if you move the CURSR joystick left after the first press of the INFO button, you
can choose from the most recently used and viewed airports and navaids under the RECENT
tab.
Press to navigate directly to the currently displayed or highlighted airport or navaid, or
ADD->FPL to add it as a waypoint in a Flight Plan.