User guide

SV-MAP-270 Navigation Mapping Software
SkyView Pilot’s User Guide - Revision Q 7-53
Viewing Procedure Charts and Airport Diagrams
Turn the CURSR joystick knob to select from a list of the available charts/diagrams. A preview of
the chart is shown below the list. To view a chart on the map page, press VIEW.
Zooming/Panning Charts
Once a chart is displayed, turning and moving its joystick knob will pan around and zoom in and
out of the chart, just like on the regular map page.
To quickly zoom the chart so that its entire width fills the window, depress (click) the CURSR
knob. A second press of the knob will zoom out so that the entire chart can be seen at once.
Automatically Follow your Aircraft
Press FOLLOW to have the SkyView pan the chart automatically so that the airplane is centered
as it flies over the chart. This feature is not available on charts that are not geo-referenced.
When a chart is not geo-referenced, the following icon is shown at the bottom right of the chart
page. Additionally, when an airport diagram is initially chosen, FOLLOW is automatically
enabled to aid situational awareness at airports.
Figure 120 - Chart not Geo-Referenced
Returning to the Map View
To close the chart and return to the map, you can either:
 Press MAP MENU > CLOSE, and then EXIT.
 Press (click) and hold the joystick knob for a second.
Returning to the Last Viewed Chart
To quickly return to the last chart that was viewed:
 With the normal map page displayed, press (click) and hold the joystick knob for 1/2
second.
o When you are within 300 feet AGL of at an airport with an available diagram,
that airport diagram is displayed instead of the most recently viewed chart.