User guide

SV-MAP-270 Navigation Mapping Software
7-60 SkyView Pilot’s User Guide - Revision Q
 The estimated time of arrival at the next waypoint in the flight plan. This
time does not account for time zone changes. If GPS ground speed is <25
knots, your Vno speed setting is used for so that you can see approximate
travel times while on the ground.
o ETE (Final)
 The remaining estimated time en route to the final waypoint in the flight
plan. If GPS ground speed is <25 knots, your Vno speed setting is used for
so that you can see approximate travel times while on the ground.
o ETE (Next)
 The remaining estimated time en route to the next waypoint in the flight
plan. If GPS ground speed is <25 knots, your Vno speed setting is used for
so that you can see approximate travel times while on the ground.
o GPS Altitude
 The current GPS altitude. Note that this is MSL, not AGL. This number
may differ significantly from your barometric (indicated) altimeter due to
variations in the GPS data model, GPS accuracy, and nonstandard
variations in outside pressure.
o Ground Speed
o Next Course
 The direction from the next waypoint to the waypoint after that in a flight
plan.
o Next Waypoint
o Course
 The direction from the previous waypoint to the next waypoint.
o VS REQ'D DESTINATION
 Vertical Speed Required to Destination shows the vertical speed
necessary to descend from the current position and altitude to a defined
target position and altitude above and before your final waypoint at the
current ground speed. This information is also displayed as a magenta
line on the vertical speed indicator.