User guide

Messages and Alerts
11-8 SkyView Pilot’s User Guide - Revision Q
Spoken Alert (if
configured)
Message Displayed
in Message
Window
Notification
Area Alert
(severity)
Description
“Caution”
CROSS CHECK
ATTITUDE
While in flight, IAS has become
invalid (likely due to icing or
obstruction), and all GPS sources
have failed. The attitude
indication should be considered
unreliable.
“Caution”
TOUCH PANEL
FAULT
Touch Hardware is currently
offline.
“Switch Fuel Tank”
SWITCH FUEL TANK
The optionally-configured fuel
tank timer has reached its pre-
configured time or fuel quantity
consumption limit.
“Timer Expired”
TIMER EXPIRED
A DOWN timer under TOOLS >
TIMER has expired.
“Message”
BATTERY TEST
FAILED
A full backup battery test was
performed, and it failed. See the
Installation Guide for further
troubleshooting information.
“Message”
BATTERY TEST
NEEDED
A year or more has passed since
the last successful backup battery
test, or the last three SkyView
shutdowns were abnormal.
“Message”
SOFTWARE
MISMATCH
SkyView components are not all
running the same software
version
“Message”
OEM CONFIG
MISMATCH
OEM-customized displays are not
in sync with each other
“Message”
TAIL # MISMATCH
Tail numbers differ between
SkyView displays – settings will
not properly synchronize
“Gees” (repeats)
None
n/a
The G-meter is in the yellow
caution range
“Over Gees” (repeats)
None
n/a
The G-meter is in the red warning
range
“Traffic Not Available”
None
n/a
Traffic is not available from a
previously available source