User guide

Messages and Alerts
SkyView Pilot’s User Guide - Revision Q 11-9
Spoken Alert (if
configured)
Message Displayed
in Message
Window
Notification
Area Alert
(severity)
Description
“Traffic”
None
n/a
A new traffic advisory target has
been identified. Note that this
audio alert is suppressed when
not in flight to reduce nuisance
alerts. Other visual traffic alert
indications persist, however.
“Autopilot Mode”
None
n/a
The autopilot roll mode has
changed since it was engaged.
This includes sequencing onto an
armed mode (such as an ALT Hold
> VNAV sequence)
“Autopilot Disconnect”
None
n/a
The roll or pitch autopilot axis has
disconnected
“Trim Up”
None
n/a
The autopilot requires nose up
trim to maintain control of the
aircraft, and has been
annunciating this visually on the
display for at least 30 seconds.
This alert is played a maximum of
once every 30 seconds.
“Trim Down”
None
n/a
The autopilot requires nose down
trim to maintain control of the
aircraft, and has been
annunciating this visually on the
display for at least 30 seconds.
This alert is played a maximum of
once every 30 seconds.
“Autopilot Airspeed
High/Low”
None
n/a
The autopilot airspeed limits are
exceeded.
“Approaching Minimums”
None
n/a
Altitude is within 200 feet of the
MDA bug
“Minimums”
None
n/a
Aircraft has descended below
MDA bug
“Approaching Altitude” /
“Leaving Altitude”
None
n/a
Altitude alerter notification that
the aircraft is approaching or
leaving the bugged altitude
“Overspeed”
None
n/a
Indicated airspeed is exceeding
Vne