User guide

PFD Operation
SkyView Pilot’s User Guide - Revision Q 4-17
and Dynon's approach to AOA is available at www.dynonavionics.com/docs/SkyView_AoA.html.
OAT
Outside air temperature (OAT) as shown in Figure 35 is displayed in the very
lower-right corner of the PFD. Units can be set to degrees Fahrenheit or degrees
Celsius. Reference the SkyView System Installation Guide for instructions on
how to change the displayed units. If OAT is not valid (i.e., disconnected or
damaged), then "OAT ---" is displayed.
Synthetic Vision (SYNVIS)
Synthetic Vision depictions of terrain, runways, obstacles, and other information
are meant as informational aids only. These depictions should not be used as the
primary means for obtaining situational awareness of these features in flight.
Terrain data is obtained from third party sources. Dynon cannot independently
verify the accuracy of terrain data at all geographical points.
When valid GPS data is available and Synthetic Vision is licensed on a SkyView display, the PFD
features integrated Synthetic Vision. Synthetic Vision displays the terrain directly ahead of the
aircraft. Terrain is graphically represented in sectional chart color variations which represent
topographical elevations and water features. Terrain is textured with a subtle checkerboard
pattern to aid in identifying aircraft movement.
You may toggle the Synthetic Vision system off or on at any time. Press PFD on the Main Menu,
then press MODE and then press SYNVIS.
Figure 36 contains an example SkyView Synthetic Vision view.
Figure 35–
Example OAT