User guide

SV-MAP-270 Navigation Mapping Software
SkyView Pilot’s User Guide - Revision Q 7-5
a full Frequent Flyer subscription, which includes charts, for the duration of your existing
subscription. See the section on Charts and Airport Diagrams further along in this chapter for
additional information.
To order and download PocketFMS AeroData, visit their website at
www.pocketfms.com/dynon/
Worldwide Customers - Jeppesen NavData® and Obstacle Data Services
Aviation and Obstacle for customers outside the US is available from Jeppesen. Only one
update or annual subscription purchase is needed per airplane. To purchase Jeppesen data:
 Visit www.JeppDirect.com/viewavionics for data subscription information from
Jeppesen for your SkyView display.
 To order service, please call Jeppesen at:
U.S. & Canada
United Kingdom
Europe (except UK),
Middle East, Africa
and Asia
Australia
Toll-Free:
1-866-498-0213
Direct:
1-303-328-4030
Toll-Free:
0 [phone]
Direct:
[phone]
Toll-Free:
0 800 5377 3736
Direct:
[phone]
Direct:
[phone]
 Reference the Loading Databases section below of this guide for instructions on how to
import the file onto a SkyView display.
Additional technical support from Jeppesen can be found online at
http://www.jeppesen.com/support/technical-support.jsp
Loading Databases
1. Download database file(s) from downloads.dynonavionics.com, Jeppesen, or
PocketFMS.
a. If you’ve downloaded data from the Dynon website or PocketFMS: Copy the file
onto your USB flash drive. The file must be in the root directory of the drive in
order to be recognizable by the display.
b. If you’ve purchased data from Jeppesen: It is important that the Jeppesen JSUM
program is used to place the Jeppesen data on the USB memory stick that will be
used to load the data onto SkyView. If you manually copy Jeppesen data onto a
USB memory stick, it will not load onto your SkyView system.
2. Insert the USB flash drive into one of the display’s USB sockets.
3. Go to the Load Files Wizard (SETUP MENU > SYSTEM SOFTWARE > LOAD FILES…).
4. Select a file and press LOAD to load the file onto the system.
5. Exit Setup