Product Reference Guide Read and follow the instructions contained within carefully before use. Retain this guide in a safe and easily accessible place for future reference. SERIES Drawings, pictures and specifications contained in this manual are for illustration purposes only – actual product may vary. VALCO BABY reserves the right to alter any specification(s), colour or features without prior notice or incurring any obligation to similarly alter products previously purchased.
Thank you for purchasing a quality VALCO product. Due to our policy of continuous product development, this product is constantly evolving. It is possible that some features or procedures outlined here have changed since this document was written. If you are unsure of any procedure outlined here please contact the store from which you purchased it to obtain the most up to date information, or contact us via the internet. See relevant web contact addresses on the back page.
Installing/Removing and using the front wheel forks Your Runabout stroller utilizes our unique and revolutionary new TRIMODE™ front swivel system: 1. To install the front fork, rotate the TRI-MODE selection dial to the centre (450) position. 2. Tilt the stroller frame upward on the rear wheels. 3. Insert the fork shaft into the TRIMODE housing till it “clicks” into place. To remove the front fork: 1. Rotate the TRI-MODE selection dial to the centre (450) position. 2.
Adjusting your seat – zip/belt System (selected units) NOTE: Before using your stroller, be sure to attach the tether straps around the stroller frame by feeding the strap through the slit in the steel buckle. While not essential for safety, these help reduce the motion of the seat within the stroller frame. 3. Press down on the side locking hinges (on the basket) to lock the frame in the open position. 4. Secure the handle to the frame by engaging the locking clamps on both sides.
EXTRAS Your Runabout is equipped with a tire pump that hangs in a special pocket found sewn beneath the seat at the rear. Your tires should be kept at a pressure of 40 p.s.i. Under inflated tyres can cause excessive and uneven tire wear, greater susceptibility to punctures and greater difficulty in smooth operation. Your Runabout is equipped with a removable “Head Hugger” and shoulder harness covers. The “Head Hugger” is designed to optimize the comfort of newborn babies within the stroller.
OPTIONAL/ADDITIONAL ACCESSORIES UV Protective Insect Net Our unique insect net zips directly in to the inside of your RUNABOUT Tri Mode hood. In addition to keeping baby cool, comfortable and safe from insects, it also blocks up to a massive 80%* of the sun’s harmful UV rays. (* tested to Australian Standard 4399) Toddlerseat Available in versions for both Single and Twin Runabout models, the optional toddlerseat sits firmly inside the chassis.
OPTIONAL ACCESSORIES The VALCO HITCHHIKER is a boon to any parent with a child who is old enough to walk but young enough to need to rest along the way. Made of high quality and extremely sturdy materials (maximum weight 30 kg’s / 66 lb’s), the HITCHHIKER is easily adjustable for height, width and distance from the stroller which makes it fit most brands, makes and models of strollers.
WARNINGS Your child’s safety is your responsibility ……… Be sure to check that all clamps and buckles are securely fixed and in place before use. Check all parts for breakage or fatigue before use. Discontinue immediately if any part is found to be damaged or broken. The maximum weight of the child for which this stroller is intended is 22 kg’s (48 lbs) The maximum height of the child for which this stroller is intended is 106 cm (42 in) This product will become unstable if the recommended load is exceeded.
