User manual
Limited Warranty
Valcom, Inc. warrants its products to be free from defects in materials and workmanship underconditions of normal use and service
for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement, repair or
refund of any suchdefective device within the warranty period, provided that:
1.inspection by Valcom, Inc. indicates the validity of the claim,
2.the defect is not the result of damage, misuse, or negligence after the original shipment,
3.the product has not been in any way repaired by others and that factory sealed units are unopened.(A service charge plus parts and
labor will be applied to units defaced or physically damaged).
4.freight charges for the return of products to Valcom, Inc. are prepaid,
5.all units “out of warranty” are subject to a service charge. The service charge will cover minor repairs(major repairs will be subject
to additional charges for parts and labor).
This warranty is in lieu of and excludes all other warranties expressed or implied, and in noevent shall Valcom, Inc. be liable
for any anticipated prots, consequential damages, loss oftime or other losses incurred by the buyer in connection with the
purchase, operation or useof the product.
This warranty specically excludes damage incurred in shipment. In the event a product isreceived in damaged condition, the carrier
should be notied immediately. Claims for suchdamage should be led with the carrier involved in accordance with the F.O.B.
point.
CONTACT: Please contact Valcom at the address and phone number below to receive a return authorization number and to arrange
for the repair or replacement covered by this warranty. Please indicate the Product’s serial number in all correspondence or a RMA
authorization number in the absence of a serial number. Valcom, Inc., 5614 Hollins Road, Roanoke, VA 24019, Phone: 540-563-
2000.
FCC Part 15 : This equipment has been tested and found to comply within the limits for a Class A digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of the
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct interference at
his own expense. In order to maintain compliance with FCC regulations shielded cables must be used with this equipment. Operation
with non-approved equipment or unshielded cables is likely to result in interference to radio & television reception.
IC ES 003 : This Class A digital apparatus complies with Canadian ICES-003 C et appareil numérique de la classe A est conform e
à la norme NMB-003 du Canada.
CE CONFORMITY : The Multi-Messager USB conforms with the following standards, in accordance with the EU Safety, EMC
Emissions, & EMC Immunities : EN 60950-1:2001, EN 55022:1998 for Class A, EN 55024:1998 + A1:2001 + A2:2003, EN 61000-
4-2:1995 + A1:1998, EN 61000-4-3:1995, EN 61000-4-4:1995, EN 61000-4-5:1995, EN 61000-4-6:1996, EN 61000-5-11:1994.
11