User's Manual

Power Sliding Door: (Right or Left) Press and Hold the PSD-R or PSD-L button for 1 ½
second, the LED will blink once, the Power Sliding Door will open and continue until
he door is open all the way. If at any time, the User wish to Stop the Power Sliding Door
for any reason, the User can Stop it by a “Quick Press” of the same Power Sliding
Door button. The Left Sliding Door can only be Stopped by a Quick Press of the PSD-L
and the Right Sliding Door can only be Stopped by a Quick Press of the PSD-L.
PTG- Power Tail Gate: Press and Hold the PTG Button for 1 ½ second to activate the Power
Tail Gate. The LED will blink once. To Stop the Power Tail Gate at any time use the
“Quick Press” and released of the PTG button.
PANIC: The PANIC button is use for Alert Attentions and added security to the User.
If at any time the user feel he or she is in a danger situation or want to alert others to stay
away from the Vehicle, the User can Press and Hold the PANIC Button for 1.5 second-
The Horn will sound and Lights will flash for up to 30 second, until the Panic Time Out.
If more alert is needed, the user can press and Hold the PANIC Button again for 1.5
second.
To Stop the PANIC Alert, simple perform a “Quick press” of any buttons.
Power Windows: (Up and Down) To use the Power Windows-
• Windows UP: Press and Hold the LOCK button for 1.5 second. The Windows glass
will go up until it has reached the top of the window.
• If for any reason, the User want to Stop the window glass from going up,
simply perform a “Quick Press”, on the Lock button, this will stop the window glass at
it’s current location.
• Windows Down: Press and Hold the Unlock Button for 1.5 second. The Windows
glass will go down until it has reached the bottom of the window.
• If for any reason, the User want to Stop the window glass from going down,
simply perform a “Quick Press”, on the Unlock button, this will stop the window glass at
it’s current location
Compliance statement (part 15.19)
This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Warning (part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
.