User Instructions

ManualsBrandsValeo Schalter und Sensoren ManualsElectronicsSteering Column Switch Controls Unit

Brand: VALEO

Product name - Model name : COM EVO CEM00



FCC - ISED regulatory notices

This device complies with part 15 of the FCC rules and Industry Canada

licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1). this device may not cause

Harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation of the device.

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY VALEO

SCHALTER UND SENSOREN COULD VOID THE USER’S AUTHORITY TO OPERATE

THE EQUIPMENT.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux

appareils radio exempts de licence. L'exploitation est autorisée aux deux

conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)

l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d'en compromettre le fonctionnement.

Summary of content (10 pages)

PAGE 1
Brand: VALEO Product name - Model name : COM EVO CEM00 FCC - ISED regulatory notices This device complies with part 15 of the FCC rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1). this device may not cause Harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
PAGE 2
MPERATIVE: Respect the safety and cleanliness instructions. Legend: Symbolization of operations. WARNING: Before any intervention: Position the wheels in a straight line. WARNING: For any intervention involving uncoupling between the steering wheel and the wheels (steering wheel, control module under steering wheel, column, rack ...), ensure the setting of the rotary switch of the control module under the steering wheel of management.
PAGE 3
Finds Designation Quantity (1) Steering wheel 1 (2) Steering wheel bolt 1 (N) (N) Replace systematically 2. Preliminary operations Disconnect the service battery. Remove the driver airbag. 3. Removal CAUTION: WHEN PASSING THE HORN AND AIR BAG CONNECTORS THROUGH THE STEERING WHEEL LIGHT; NO TRACTION O R OTHER STRESS IS ALLOWED O N E LECTRICAL H ARNESSES AND C ONNECTORS. Figure : B3EG0Y5D 4. Rest Proceed in the reverse order of removal.
PAGE 4
Reconnect the service battery. Check the operation of the different equipment. IMPERATIVE: R espect the safety and cleanliness instructions. Legend: Symbolization of operations. WARNING: Before any intervention: Position the wheels in a straight line. WARNING: For any intervention involving uncoupling between the steering wheel and the wheels (steering wheel, steering wheel controls, steering column, steering rack, ...
PAGE 5
Finds Designation Quantity (1) Steering wheel gear paddles 1 (2) Screw 2 2. Tool Tool Figure : E5AG02MT 3. Preliminary operations NOTE: The operation is the same for a right or left direction. Disconnect the service battery. Remove the steering wheel. 4.
PAGE 6
Figure : B3EG0YZD Figure : B3EG0Z0D 5. Rest Proceed in the reverse order of removal. 6. Complementary operations Refit the steering wheel.
PAGE 7
Reconnect the service battery. Check the operation of the different equipment. IMPERATIVE: R espect the safety and cleanliness instructions. Legend: Symbolization of operations. WARNING: Before any intervention: Position the wheels in a straight line. WARNING: For any intervention involving uncoupling between the steering wheel and the wheels (steering wheel, steering wheel controls, steering column, steering rack, ...
PAGE 8
Finds Designation Quantity (1) Steering Wheel Controls 1 (2) Fixing collar 1 2. Tool Tool Reference Designation [1350-ZZ] Stripping tools Figure : E5AG02MT 3. Preliminary operations NOTE: The operation is the same for a right or left direction. Disconnect the service battery. Deposit: ● ● The steering wheel Steering wheel speed controls (if equipped) 4. Deposit CAUTION: The lock tabs on the steering wheel controls must not be damaged or broken.
PAGE 9
Figure : B3EG0Z2D Figure : B3EG0Z3D 5. Rests WARNING: ADJUST THE R OTARY S WITCH B EFORE R ESTING T HE S TEERING W HEEL CONTROLS. 5.1. Steering wheel controls (new) The rotary switch of the controls under new steering wheel does not need to be adjusted.
PAGE 10
Remove the lock. 5.2. Recuperated steering wheel controls Search point 0: ● ● ● Press the center of the rotary switch Turn to the stop clockwise Turn the ignition switch 2.5 turns anticlockwise NOTE: Do not force when the stop is reached. Check the alignment of the notch with the index finger. CAUTION: Never turn anticlockwise before going to the stop, this irreparably damages the rotating switch tape. 6. Common Operations CAUTION: Position the wheels in a straight line.