User's Manual

-Confidential-
Valerann R&D
2
c) Install the road studs according to “Valerann Smart Road Stud -
Installation Protocol - REV04”
d) At that point, the system should run and save the data from the road at
the gateway memory.
3. Data extraction:
a) Extract the gateway’s memory (on the back of the Odroid CPU board):
b) Connect the memory to Odroid’s SD adaptor:
c) Connect the SD adaptor to an SD card reader and extract the data to a PC.
4. Safety and Precautions:
a) Any maintenance on the system will be done by Valerann personnel or an
approved contractor/electrician.
b) Outdoor units and antennas should be installed ONLY by experienced installation
professionals who are familiar with local building and safety codes and,
wherever applicable, are licensed by the appropriate government regulatory
authorities. Failure to do so may void the gateway (AS3100 product) warranty
and may expose the end user or the service provider to legal and financial