CONTENTS 1. WELCOME 1.1. Intended use 1.2. Safety information 1.3. Product description 1.4. Light and health 2. USE OF THE DEVICE 2.1. Basic use 2.2. Suggested use 2.3. Charging 2.4. Adjustment of the light settings 2.5. Troubleshooting 2.6. Maintenance and service 3. DISPOSAL 4. WARRANTY AND LEGAL INFORMATION 5. TECHNICAL INFORMATION 35 36 37 40 41 42 42 43 44 45 47 47 48 48 50 1.
Read all safety information and instructions for use carefully before using the device. KEEP THE USER GUIDE FOR FUTURE REFERENCE. Visit www.valkee.com/support now to: • Register your device, to benefit fully from Valkee user support • Learn more about your device Please send us your feedback at support@valkee.com or share it on Facebook at facebook.com/ValkeeCompany. 36 1.1. INTENDED USE The Valkee 2 bright light headset is intended for use to treat symptoms of seasonal affective disorder.
1.2. SAFETY INFORMATION IMPORTANT NOTE: Use the device only as instructed by Valkee, to avoid potential personal injury or damage to the device. Read all warnings and cautions before using the device. The device has CE Class II(a) medical device certification and has been clinically tested. The device meets the requirements of the Medical Device Directive 93/42/EEC. CONTRAINDICATIONS: The device is not intended for children or for use during pregnancy.
• • • • • 38 (hypotension) You have an ear infection You suffer from, or have suffered from, depression You have bipolar disorder You are hypersensitive to light (e.g. because of epilepsy) You are taking: • e.g. certain antibiotics or herbal compounds such as hypericin • antidepressants (e.g.
ate it. Contact Valkee for service assistance. DO NOT share earplugs to avoid personal hygiene risks. DO NOT overuse the device. This helps avoid nausea, headache and sleep disturbances. No clinical data are available on side effects of multiple dosing. MAKE SURE that neither the device nor any of its cables can catch on anything when you are using the device, to eliminate the possibility of strangulation. CAUTIONS: For safe operation, keep the device away from water.
1.3. PRODUCT DESCRIPTION F B A. Valkee main unit B. Ledset earplugs C. Silicone fitting for the earplug D. Power on/off button C E. USB connector for the Ledset and charger cable F. Indicator light for battery power and charging G.
1.4. LIGHT AND HEALTH Our daily functioning varies in line with the 24 hours of the day. This circadian (from circa = about, dies = day) variation is caused by our internal biological clock, which gets its timing cues from the external light-dark cycle. A wellsynchronized biological clock helps regulate our mood, sleep, energy, appetite and digestion and helps ensure our well-being.
2. USE OF THE DEVICE 2.1. BASIC USE The device emits UV-free, blue-enriched white light through the ear canals to the light-sensitive regions of the brain. Most people benefit from the default bright light settings of the device (see ”Technical Information”) when applied in the morning. Good timing of exposure to Valkee bright light is essential for reaching the best results. The best time to use your device depends on the intended purpose of use.
2.2. SUGGESTED USE 4. 5. Enjoy the Valkee bright light until the device switches off automatically after 12 minutes (by default). Clean the earplugs regularly. NOTE: You can interrupt the session by pressing the power button again. If you turn on the device again within 10 seconds, you can resume the session from the point of interruption. NOTE: If you press the power button to start the device without first connecting the Ledset, the device gives an error signal (four beeps and four flashes).
withdrawal, decreased physical activity, fatigue, cravings for foods that are high in carbohydrates, and weight gain, use the device on a regular basis in the morning within two hours after waking up at the same time each day. If your seasonal mood swings are more severe and you are suffering from depression, or if you currently are on medication for depression, consult your physician and use light therapy only under supervision. 44 2.3.
2.4. ADJUSTMENT OF THE LIGHT SETTINGS Connect the USB cable to the main unit and the computer’s USB port. Charging is in progress when the battery-indicator lights cycle on and off; the battery is fully charged when all the indicator lights are illuminated steadily. Recharge your device when the bottom-most indicator light is flashing. Before you consider changing the default settings, try the bright light at a different time of day: not everyone benefits from morning light exposure.
On first use, the session starts with the default bright-light settings (see “Technical Information”). The default settings can be adjusted in the following manner: 1. 2. 3. 46 Turn off the device. Press the power button for three seconds to reduce the length of the session by three minutes and the intensity of the bright light by 25%. For further reduction, continue holding down the power button. If you want to return to the default settings, continue holding the power button down.
2.5. TROUBLESHOOTING ERROR CONDITION : The device gives an error signal (four beeps and four flashes of the indicator lights) if the Ledset becomes disconnected or broken. To rectify the error, make sure that the Ledset is properly connected to the main unit and/or that the Ledset earplugs and Ledset wires are not broken. If the error persists, contact Valkee. CLEANING: The device is intended for personal use only.
3. DISPOSAL This is an electronic device containing a lithium-ion battery as an internal power source. Do not throw away the device with normal household waste at the end of its life. Consider the environment: deliver the device for recycling at an official collection point for electronic devices. Check with the appropriate recycling organisation for local disposal information. 4. WARRANTY AND LEGAL INFORMATION The limited Valkee warranty period of one year starts on the date of purchase.
• for example, from opening the device or repairing, adjusting, or modifying it Faults or damage caused by factors that Valkee cannot reasonably be expected to have control over Faults must be reported within reasonable time from their detection. When reporting a fault, you must present a certificate of warranty, a receipt of purchase, or another reliable account of where and when the product was purchased.
5. TECHNICAL INFORMATION Rated frequency 50–60 Hz NOTE: See the separate leaflet in the sales package for the EMC information. OPERATING CONDITIONS Temperature Relative humidity from 5 °C to 40 °C 15–93% non-condensing MODEL IEC 60601-1 CLASSIFICATION Mode of operation VALKEE 2 Continuous DEVICE’S ELECTRICAL SPECIFICATIONS Rated voltage 5 V (DC) Power consumption max. 0.5 A BATTERY SPECIFICATION Lithium-ion battery 3.7 V, 450 mAh Battery recharging time max.