Certifications 2

MODEL COLOR
Safety data sheet
according to 29 CFR 1910.1200
SECTION 4: FIRST-AID MEASURES (continued)
4.3
Indication of immediate medical attention and special treatment needed, if necessary:
Non-applicable
SECTION 5: FIRE-FIGHTING MEASURES
5.1
Suitable (and unsuitable) extinguishing media:
Product is non-flammable, low risk of fire by the inflammability characteristics of the product in normal conditions of storage,
manipulation and use. In the case of the existence of sustained combustion as a result of improper manipulation, storage or use
any type of extinguishing agent can be used (ABC Powder, water,...)
5.2
Specific hazards arising from the chemical:
Due to its non-flammable nature, the product does not present a fire risk under normal conditions of storage, manipulation and
use.
5.3
Special protective equipment and precautions for fire-fighters:
Depending on the magnitude of the fire it may be necessary to use full protective clothing and individual respiratory equipment.
Minimum emergency facilities and equipment should be available (fire blankets, portable first aid kit,...)
Additional provisions:
As in any fire, prevent human exposure to fire, smoke, fumes or products of combustion. Only properly trained personnel should
be involved in firefighting. Evacuate nonessential personnel from the fire area. Destroy any source of ignition. In case of fire,
refrigerate the storage containers and tanks for products susceptible to inflammation. Avoid spillage of the products used to
extinguish the fire into an aqueous medium.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1
Personal precautions, protective equipment and emergency procedures:
Isolate leaks provided that there is no additional risk for the people performing this task.
6.2
Environmental precautions:
This product is not classified as hazardous to the environment. Keep product away from drains, surface and underground water.
6.3
Methods and materials for containment and cleaning up:
It is recommended:
Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustible
absorbents. For any concern related to disposal consult section 13.
6.4
Reference to other sections:
See sections 8 and 13.
SECTION 7: HANDLING AND STORAGE
7.1
Precautions for safe handling:
A.-
Precautions for safe manipulation
Comply with the current standards 29 CFR 1910 Occupational Safety and Health Standards. Keep containers hermetically
sealed. Control spills and residues, destroying them with safe methods (section 6). Avoid leakages from the container.
Maintain order and cleanliness where dangerous products are used.
B.-
Technical recommendations for the prevention of fires and explosions
It is recommended to transfer at a slow speed to avoid the creation of electrostatic charges that could affect flammable
products. Consult section 10 for conditions and materials that should be avoided.
C.-
Technical recommendations to prevent ergonomic and toxicological risks
Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.
D.-
Technical recommendations to prevent environmental risks
It is not necessary to take special measures to prevent environmental risks. For more information see subsection 6.2
7.2
Conditions for safe storage, including any incompatibilities:
A.-
Technical measures for storage
Minimum Temp.:
41 ºF
Page 2/7
Date of compilation: 6/8/2015 Version: 1
- CONTINUED ON NEXT PAGE -