Skirted and Dropin Alcove Tubs Install Guide

Maintenance
General cleaning: Cleaning can be accomplished with hot, soapy water and a damp cloth. Whirlpool systems
can be cleaned by running bleach, or a mixture of baking soda and vinegar through the system while in use;
then cycling the cleaner. After cleaning is complete, refill with water, and allow the system to run through a
thorough rinse; cycling the water through the whirlpool jets to clear them. Weekly cleaning is recommended
for tubs and whirlpool jetting systems.
Regular cleaning provides an effective defense against various types of bacteria capable of developing in
deposits which can build up over time in all bathtubs and showers.
For acrylic surfaces, occasional use of special acrylic surface cleaners will add luster and protect your finish.
Do not use abrasive cleaners, scrapers, metal brushes, or any items or products that could scratch or dull
the surface.
Removing joint compound: Use a plastic or wood spatula covered with a damp cloth. Do not use any metal
blades or a metal brush. If a rubber mat is used, it must be removed immediately after each use. Ignoring
this recommendation will cause damage not covered by the warranty.
Congratulations on becoming a part of the Valley Acrylic family. You are now the proud owner of one of
Canada’s best made & most hygienic bath products; proudly made in Canada, by Canadians.