Owner`s manual

Section Views

Window frame

Bottom railing

Battery slider

Valve

Reﬁ t Window

1. To reﬁ t the window, place it in its bottom railing and

push its top against the ﬁ rebox.

Ensure there is

no glass or vermiculite particles in the bottom

railing.

2. While you hold it, pull the side levers back into the

window brackets on each side.

3. Apply light hand pressure against the window frame

sides to bed-in the window seal.

4. If the Hot Glass Warning plates have been

removed from the front lower corner of the

windows, reinstall it by sliding it between the

glass and the frame as indicated.

Installation

IMPORTANT: To ensure a safe operation,

verify that the levers are hooked properly to the

window tabs; then, pull out the top of the window

and release it to insure the springs return it.

Also, double-check that the bottom of the

window frame is correctly installed in its the

bottom railing.

Hot Glass Warning Plate

QUALIFIED

INSTALLER