USER MANUAL 2 DIN Multimedia System with 5.8" Touch Screen LCD Monitor MODEL: DD-858W (l PWR MUTE (I )) [ ~ .
Congratulation on your purchase of this high quality DD-858W Car Multimedia Player. Before installing or using this unit, please read this manual carfully to ensure current operation. Keep the manual at hand for future reference. Contents Features ···· ·.. · ·· · Installation Wire Connection ·· .. ···3 · ·········3 7 9 .. Main Unit Display Main Setup ·10 11 13 Radio Operat.
- 5.8 inch Analog TFT Screen - Touch Screen Control -AM/FM - DVD R/RW, CD R/RW, VCD title playable - MP3, WMA, MPEG AudioNideo file playable - Rear Zone Audio Output - OSD : On Screen Display - AUX, REAR VI EW(Reverse Camera) Input for System Expansion - USB, SD CARD Input - High Power MOSFET Devices Output - Bluetooth Connection compatible (option) - Media playable (option) It's a good idea to read all instructions before installation.
Remove Old Unit 1. 2. 3. 4. Remove dash panel to expose radio chassis. Remove the screws from the mounting bracket and remove the unit. Disconnect wiring harness. Unscrew factory mounting brackets.
1. Install brackets to the new unit supplied by car. 2. Or you can use the bracket supplied with the unit. Wire Connection 1. Connect wiring adapter to existing wiring harness. 2. Connect antenna lead.
1. Carefully slide the unit and frame into dash opening. 2. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the unit using the screw and hex nut provided. Bend the strap to position it as necessary.
Wire~ Connection <> 1[] L i! 0 _--B::..:I=ue=------~ Block Front BI
Connection 1. AUX IN L/RNIDEO 2. Rear Monitor 2, Camera 3. Bluetooth Microphone 4. Power Antenna Wire(Blue): Connect to a motorized (power) antenna and/or to a remote turn-on lead for an amplifier. 5. Front and Rear RCA Outputs(Black/Gray) 6. Left Front Speaker(White, White/Black) 7. Left Rear Speaker(Green, Green/Black) 8. Right Rear Speaker(Violet, Violet/Black) 9. Right Front Speaker(Gray, Gray/Black) 10. ACC Power Wire(Red): Connect to a +12 volt circuit that is only live when the ignition is on. 11.
The buttons located on the DD-858W front display and the remote control that perform the same function are assigned the same number for reference on the diagrams and in the text. 6 1 r III I PWR A I IJ oDVD MULTI MEDIA RECEIVER DD-858W MUTE I r-I--- s ....' @ r SRC ] l- 7 --=- ~~ @ @ r f- s ....
Remote Contol DD-858W has a remote control: a full featured hand-held IR(infra-red) remote control. It uses a CR2025 Lithium battery. The battery compartment is located on the back of the remote control near the bottom edge. To replace the battery, pull the compartment out, as indicated on the remote control.
General Operation Note: Some DVDs require specific operation or allow only limited operation during playback which may not respond to all operating commands. When this occurs, the symbol appears on the TFT screen, indicating that the operation is not permitted by the player or the disc. POWER 1. Press any button of the unit to turn the unit on. The buttons on the front of the unit light up and brand logo appears briefly in the TFT screen followed by the current mode status. 2.
EQ At any mode, you can see EO at the down-left corner in screen. Once you touch the EO icon or press A.SEL button(12) on the remote control, screen will show Adio Adjust menu display. - EO : Press
MAIN SETUP Enter/Exit Main Setup Mode 1. Press MAIN SETUP in the mode selection display. 2. Press ~ in upside on screen to exit setup mode and ruturn to the last mode. Or if no touch on screen for 10 seconds it automatically returns to the last mode. GENERAL Once you enter the main set up mode, General setup menu will be displayed on the screen. System Time 1. 2. 3. 4. 5. Press the Syetem Time menu bar on screen to open Clock Adjustment display. Press ~ ,T in display to set the hour and minute.
Touch Screen Calibrate 1. Press TS Calibrate menu bar on screen to open the TS Calibrate window as below which asks Yes/No for start. 2. Press Yes to start touch screen calibration. 3. Press D at up-left, dwon-Ieft, down-right and up-right corner on screen as displayed below.
User Default Settings 1. Press User Default Settings menu bar on screen to open the window which asks Yes/No. 2. Press Yes for start resetting. The unit will be resetted and automatically off. ASP (Audio Setup) Enter the Main Setup mode and press ASP at downside of screen to display audio setup menu. - Bass Center Frequency / Bass Q Value / Bass DC Gain / Treble Center Frequency/ Loud Center Frequency Press ~ ,~ at the menu bar on screen to adjust the audio effect setting value.
Camera Image Press
Radio Operation Switch to Radio Mode When you turn on the unit, radio mode will displays on screen first. When switching the other mode to radio mode, press MODE button(9) in the remote control or touch the mode icon at up-right side of screen to go to the mode selection display, and press radio mode icon. ... ~= - AM 1 2 24 BAND I SCAN I SETUP I~ ~. FM-3 2 90.10MHz P01 106.70MHz [I 3 106.70MHz 4 108.50MHz 5 110.10MHz ~ LOCIDX .... 1 87.50MHz DX IAS/PS ~UNEV ITUNE/\ I SEEK vi I] • ...
Adjust Sensitibity 1. OX is default as displayed on screen. When selected LOC, the sensitivity will decrease of 20dB. You can select LOC when operating SEEK near broadcasting station. 2. Press LOC/OX at downside in dispay to change the sensibility. Stereo Broadcast (ST) When ST appears at upside of display, it's stereophonic broadcasting. If not, it's monophonic broadcasting. Using Preset Stations Ten stations are preset and recall stations for each band.
RBDS Operation TA (Traffic Announcement) TA lets you receive traffic announcements automatically, no matter what source you are listening to at the moment. TA can be activated for both a TP station or an enhanced other networks TP station. - To turn TA off/on, touch TA in screen. - When recieving Traffic Announcement, if the volume is low than 16, it will be changed to 16.
AM 06: :,l} I BAND I SCAN I SETUP TAVolume -You can select volume between 0-39. Clock Tune -Select "On", when you drive to different place, the clock can adjust automatically. TA Option -Seek/Alarm. TA Retune -Long/Short.
CD Player Operation Switching to CD Mode Press MODE button(9) in remote control or touch the mode icon at up-right corner of screen to go to the mode selection display, and press DVD mode icon. (DVD mode icon is only activated when already inserted a disc.) Disc Insert/Eject 1. Place CD, label side up, into the disc slot. 2. After inserting the disc, playback starts automatically and the CD mode's playback display shows. 3. To stop the playback and eject the disc, press Eject button(6).
Fast Forward/Fast Reverse 1. Press ~~ button(17) in remote control or NEXT, ~~ increasing playback speed rate at X2, X4, X8, X16, more. 2. Press ~~ button(18) in remote control or NEXT, ~~ increasing playback speed rate at X2, X4, X8, X16, more. in screen for fast reverse, Play(normal) by pressing in screen for fast forward, Play(normal) by pressing Repeat Play 1. Press repeat 2. Press 3. Press REPEAT button(31) in remote control or NEXT, REPEAT in screen to the current track.
MP3IWMA Player Operatan You can play MP3/WMA files stored in disc/SO card/USB. Functions as play, pause, stop, track selection, fast forward/reverse, repeat play, intro scan, random play, etc. are the same for MP3/WMA with CD operation. Please see the CD player operation section for the instruction about these functions. After MP3/WMA disc/SO card inserted or USB connected, "MP3" or "WMA" and its information displays on screen and the file in disc will be played automatically.
DVD Player Operation Note: When the unit is properly installed, DVD video cannot be displayed on the main TFT screen unless the parking break is applied. If you attempt to playa DVD while the vehicle is moving, the TFT screen displays "PICTURE OFF FOR YOUR SAFETY" with a blue background. * Rear video(installed for backseat), if applicable, will operate normally. Functions as switching mode, disc insert/eject, play, pause, stop, selecting track, fast forward/reverse, etc. are the same for CD operation.
Display DVD Information Press INFO in screen or DISP button(1 0) in the remote control to display DVD information as title, chapter, audio, subtitle, etc. on screen. Section A-B Repeat Play You can set a section in track and play the section repeatedly. 1. When playback, press A-B in screen to initialize the starting point for section repeat function, displaying "Rep A-" in screen. 2.
Zoom Press NEXT, L[4J in screen for zooming in screen. GOTO (Direct Access) You can select the desired track directly. 1. Press GOTO button(34) in remote control for opening direct access display. Title search menu highlighted and selected first in the display. 2. - Using the remote control: i. Using Direction key(21-24), you can move the selection : Title - Chapter Time - ~. Select one of Title/Chapter/Time. ii. Press Number key(13) and ENT button(25) to go to the desired position directly.
DVD SETUP 1. When playing DVD/CD, press SETUP button(20) in remote control or press SETUP in screen to show DVD SETUP display. 2. After set up, to go back to DVD playback, press SETUP button(20) in remote control or ~ at up-right side of screen. Or no response for 10 seconds, it will automatically go back to DVD playback. DISC Set Rating Password 1. Press Set Rating PWD bar menu in screen. 2. Enter 8888 and ENT in the keypad displayed in screen. 3. Press Set Rating PWD bar in screen again.
activated in screen. If it is deactivated at the setup menu display, you cannot select this menu option, while it is already applied "On" automatically by unit. 2. Press ~ ,~ by Downmix menu bar in screen to select On/Off. Dolby Prologic II Dolby Prologic II technology processes any high quality stereo (2CH) movie and music audio into five playback channels(5.1 CH) of full-bandwidth surround sound.
Video Type 1. Press ~, ~ by Video Type menu bar in screen to select one type among Fill / Original/Height Fit / Width Fit / Auto Fit / Pan Scan. Disc Language Setup After language setup at DVD setup mode, when playing disc, the selected language will be applied/shown. (if available at the disc) - Subtitle / Audio / DVD Menu: Press ~, ~ by the menu bar in screen to select a desired language. Speaker After entering DVD setup mode, press Speaker below in screen to show speaker setup menu.
Test Tones Press ... , ~ by Test Tones in screen to select a speaker and perform test. Bass Manage 1. Press T at leftside of Speaker setup display to turn to the second page menu. 2. Press ... , ~ by Bass Manage menu bar to select Off/On. 3. When selected On at Bass Manage, Center Filter menu will be activated. Press ... , ~ by Center Filter menu bar to select the center filter value of bass from 80 - 300.
* Here are some tips for OSD(ON Screen Display). It is convenient for operation. We can divide the screen into several areas as below. - B A E C D F Touch A area, launcher MENU will appear. I MAIN SETUpl RADIO ~~ USB ~ MEDIA 't BLU ETOOTH • • SDI SD2 It.. jAUXIN Tounch B area, SETUP MENU will be showned(27). Touch C area, DVD Menu will be showned(Page24 and 25). Touch D area, you can operate Chapter down function. Touch E area, you can operate Chapter up function.
VCD Player Operation VCD is played at DVO mode. Switching mode and playback functions are the same for CO/OVD player operation. Audio When playing VCD, press NEXT, PSC in screen to select the audio speaker effect. (Left I Right I Mix I Stereo) PSC When playing VCD, press NEXT, PSC in screen to go to VCO starting menu display. Available when the disc over VCD 2.0 disc and PSC (Play Sack Control) recorded.
You can see JPEG file stored in disc/SO card/USB. When using a disc, it should be operated in OVO mode. When using SO CARO or USB, select the corresponding mode at mode selection display. Slide Show Operation 1. When JPG mode is played, slide show will be operated automatically. A slide stops for 5 seconds and goes to next file in alphabetical/number order of file name. 2. Press ~II button(25) in remote control or ~II in screen to play/pause. 3.
USB I SO Card Operation Switching to USB / SO Card Mode Press MODE button(2) or press the current mode icon at up-left of screen to go to mode selection display and press USB / SO card mode icon. Play Each Source According to the source stored in USB or SO card, you can play it. The source types compatible with this unit are in specification on page.
Bluetooth Operation This unit supports Bluetooth wireless connection with a bluetooth cellular phone. Note: - Before using the bluetooth function in unit, please check a microphone installed to this unit. - Digital noise & echo suppression system built-in. - Provides the best sound clarity with little or no distortion. (Echo and side-tone might be sensible depending upon cellular phone's characteristics or service networks) - Full duplex conversation - Bluetooth version 2.
Pairing 1. Click Pair in screen to have the unit prepare starting pairing. It will display "Waiting for Pairing" in screen. 2. Enable your cellular phone's bluetooth pairing. If the cellular phone requires the pin code, enter 1 2 34. 3. It will display "Pair OK " on screen when the paring is completed. * In case of failure of pairing - Delete item in paired list on your Bluetooth cellular phone - Reset both cellular phone and this unit by switching on/off - Restart pairing as per previous procedures.
Transfer a Call between Unit and Phone During conversation, for privacy or any other reason, you can transfer the call between the unit and your cellular phone by pressing I~ in screen. A2DP The function to play audio files stored in cellular phone In this mode, operate the following 5 functions . ..~ previous track ~H next track ~ play II pause • stop * Some kinds of cellular phone are not compatible A2DP function with this unit.
Media Operation Note: - You should connect your Media with this unit first using the cable supplied. - After connecting Media Player, the current mode will change to Media mode and the unit will start playing the selected list or play all files registered on the Media if no selected list. ~ The unit will not operate, or may operate improperly with unsupported versions. - When the Media Player's internal battery becomes depleted, the Media Player cannot be played even if connected to the unit.
SETUP 1. Press SETUP in screen to open iPod setup menu display. 2. Press
Troubleshooting· Problem Cause Corrective Action Fuse(s) blown Check/replace fuse(s) in vehicle fuse box Speakers are not wired correctly Connect speaker harness; check speaker wires Speaker wires shorting to chassis ground or to each other Check splices, insulate all bare wires Fader or Balance incorrectly adjusted Check audio settings AV1 or AV2 not wired correctly Check wiring Disc is upside down Insert disc right side up Disc is dirty Clean/inspect disc Format not supported by player I
Specifications CEA Power Ratings Power Output: 18watts RMS x 4channels into 4-ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference (Reference: 1watt, 40hms) Dynamic Power: 36watts @ 40hms x 4channels Frequency Response: 20Hz - 20kHz (-3dB), AudioNideo input used as source reference Standard Power Supply: 14.
FM Tuner Tuning Range: 87.5 - 107.9MHz Mono Sensitivity (-30dB): 9dBf Quieting Sensitivity (-50dB): 15dBf Alternate Channel Selectivity: 70dB Signal to Noise Ratio @ 1kHz: 58dB Image Rejection: 60dB Stereo Separation @ 1kHz: > 30dB Frequency Response: 50Hz - 15kHz, -3dB AM Tuner Tuning Range: 530 - 1720kHz Sensitivity (-20dB): 30uV Signal to Noise Ratio @ 1kHz: 50dB Image Rejection: 60dB Frequency Response: 50Hz - 2kHz, -3dB Monitor Screen Size: 5.8" (Measured diagonally), 16:9 Widescreen 5.
Place Postage Here V,lLOR MULTIMEDIA Valor Warranty Validation Dept 18061 ArenthAve City of Industry .
V/lLOR MULTIMEDIA ONE YEAR LIMITED WARRANTY Valor Multimedia hereby warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions,be proven defective in material or workmanship within one year parts and labor from the date of original purchase. Such defect(s) will be repaired or replaced with reconditioned product (at Valor Multimedia's option) for parts and repair labor.
