ITS-702W
C O N T E N T S Thank you for your choosing our product. We hope you will find the instructions in this user manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new ITS702W for maximum enjoyment.
SPECIFICATIONS CEA Power Ratings Main Amplifier Power Output: 15 watts RMS X 4 channels into 4-ohms @ < 10% THD+N Signal to Noise Ratio: 70dBA below reference. (Reference: 1 watt, 4-ohms) MAX Power: 35 X 4 watts into 4-ohms, all channels driven Frequency Response: 20Hz to 20kHz, -3dB. Aux input used as source reference Reference Supply Voltage: 14.
PREPARATION Please read all of the instructions below before beginning your installation. We recommend that you have your unit installed by an experienced 12 volt electronics installer. Features • Single DIN size, all-in-one integrated entertainment system. • Built-in DVD Player, Car specification slot-in mechanism. • Built-in ISS FM/AM Tuner, • High resolution 7” (16:9) TFT color monitor, contrast and brightness adjustment, with LCD dot matrix display. • Built-in 35W X 4 amplifier, 4.
1. When using the remote for the first time, you must pull out the insulation tape. Disconnecting the Battery To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation. NOTE: If the unit is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the preset memory may be erased.
CONTROLS AND INDICATORS Button Operation 16 15 14 13 1 2 3 4 5 6 7 8 9 10 11 12 21 20 22 19 18 17 1.POWER OFF/VOL Rotary encoder. Press the encoder to turn on the unit, press and hold to turn off. Rotate clockwise/counterclockwise to adjust the volume. Press to enter the audio adjust menu when the unit is on. 2. MUTE Press the button to mute the volume, and press the button again to restore the volume. 3. PREVIOUS 4. NEXT 5. PLAY/PAUSE Press to play/pause. 6.
.STOP. 8.Seek up 9.Seek down. 10.MODE 11. SMART DIAL Rotary encoder. Press the encoder to access MAIN menu. Rotate clockwise/counterclockwise to select a desired item and press to access or confirm. 12. RESET 13. EJECT Press once for disc insertion/ejection. 14.INFO Press to display playback information on the screen on DVD mode, if the TFT monitor is closed DVD playback information will display on the LCD screen. Press and hold to access the picture setup.
LCD Display / Indicators 1.Main display area, displays the time, tuning frequency and other text information. 2.Program Type (PTY) indicator 3.Traffic Program (TP) indicator 4.Traffic Announcement (TA) indicator 5.Alternative Frequency (AF) indicator 6.Local indicator, Indicates the local radio station seeking function is activated or not 7.Stereo broadcasting indicator, Indicates the radio is in stereo mode or not 8.Loudness indicator, Indicates the LOUD function is activated or not. 9.
REMOTE CONTROL Auto Scan Touch the button to automatically scan the available channels of all categories. Manual Scan Touch the PAGE - / PAGE + to scan the previous/next available page of channels. Touch the / to scan the previous/next available channel of current category. Storing a Channel 1. Select a band (if needed), then select a channel. 2. Touch and hold an on-screen preset channel for three seconds. The storing process is complete.
SATELLITE RADIO OPERATION Accessing SATTELLITE RADIO Mode To switch to SATELLITE RADIO mode, press the SRC button on the front panel or the (SRC) button on the remote control until SAT appears at the top of the screen. The touch keys for SATELLITE RADIO playback are described below. NOTE: An optional Terk XM Direct Universal Tuner box and XM Antenna is required to receive XM Radio, along with a subscription to XM Radio. Check with your dealer for these optional Devices.
TFT MONITOR OPERATION when you press the button, the touch screen will display the following. Open/Close TFT Monitor Press the ( Monitor. ) button on the front panel or on the front zone remote control to open/close the TFT Monitor Auto Open If “TFT Auto Open” is “On”, when the unit is turned on, the monitor automatically opens to the last viewing position, and closes automatically when the unit is turned off.
Accessing iPod Mode 3. Set Parameters: Press the ( ) buttons on the remote or press the ANGLE button ( Adjust the selected feature to the desired setting. ) on the front panel to 4. Exit Picture Quality Setting Mode: Press the PIC button on the remote or press and hold the INFO button on the unit. NOTE: A video source must be connected to the AUX input and be playing to access the above Adjustments. 1.
OPERATION INSTRUCTIONS 9. : Touch to display previous folder 10. : Touch to display next folder 11. : Touch to fast forward current track 12. : Touch to activate/deactivate Repeat Single Mode 13. : Touch to activate/deactivate Random Mode 14. : Touch to display the numeric keypad on the screen, and use it to access a track directly. 15. The disk format indicator, display the current track and total number of tracks on disk 16. Elapsed playing time 17. playback information 18.
Adjusting an Audio Feature Press the ( ) buttons on the remote or rotate the POWER OFF/VOL clockwise/counterclockwise to adjust the selected feature to the desired setting. User Flat Jazz Pop Classical Rock News Urban Rave Movie Techno BASS Playing CD Files After inserting a CD disc, files will play in the sequence of the all directory. In playing back, you can press the numeric button on the remote control or touch a track on the onscreen directly to play.
CD/MP3/WMA/JPEG OPERATION SYSTEM SETUP MENU Instructions for Insert/Eject, Play/Pause, Stopping Playback, Track Selection, Fast Forward/Fast Reverse, Scan, and Random Play are the same for DVD, CD and MP3 operation. Please see the DVD Player Operation section for information about these topics.
RATING Menu Features Selecting a Feature for Adjustment Press the ( ) buttons on the remote to select a feature to be adjusted. Rotate SMART DIAL clockwise/counterclockwise to select a feature to be adjusted. Directly Touch the options on the screen to select a feature to be adjusted. Press the ( ) buttons on the remote or rotate the SMART DIAL clockwise/counterclockwise to adjust the Brightness to the desired setting.
Select the default language which you would like the DVD menu (if applicable) to display Western European Select the default External language which you would like the subtitle (if applicable) to display. Central European AUDIO Menu The unit has a built-in Pink Noise generator to help set the relative speaker levels for multi -channel audio playback. AUDIO Menu Features Employ the Dynamic Range Control for better playback at low volumes.
DVD SETUP MENU The menus are displayed in English only. In “DVD Setup” mode, “LANGUAGE”, “AUDIO”, “VIDEO”, “SPEAKER”, and “RATING” (parental lock) are available for setup. This operation can be performed using rotary encoder, the remote control or touch screen. Accessing the DVD Setup Screen Standby 1. Touch the button on the touch-screen to access Standby mode. 2. In the standby mode, the unit stands in low-power state with audio output only. 3.
TUNER (FM/AM) OPERATION Tuner TFT display Disc Symbols 6 1 3 2 11 4 5 10 7 8 9 12 13 14 15 16 17 18 1. 2. 3. 4. 5. 6. Current Source information, touch this area to return to MAIN menu Current Radio Band Indicator Current Preset Station playing Indicator Stereo Broadcasting Indicator Radio Frequency Indicator Preset Radio Stations: Touch to recall preset stations or touch and hold to store a Station.(Total 12 stations per Band you can preset.) 7. System EQ setting 8.
Auto Tuning Press the button ( ) on remote control or touch the button on the screen to seek the next available channel by increasing the tuning frequency. Press the button again to stop searching. Press the button ( ) on the remote control or touch the button on the screen to seek the next available channel by decreasing the tuning frequency. Press the button again to stop searching. Manual Tuning Touch the or to increase or decrease the tuning frequency one step.
DVD PLAYER OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays caution information with a blue background. Rear video screens, if applicable, will operate normally. Opening/Closing the TFT Video Screen Opening the TFT Screen To open the TFT video screen, press the ( ) button on the unit or press the ( ) button on the remote control.
1. Touch to Play/Pause 2. Touch to stop 3. Touch to fast reverse 4. Touch to fast forward 5. Touch to repeat playback 6. Touch to repeat from A to B. Select the repeat point A wherever you want to start and the point B wherever you want to end, then, DVD displays from A to B continually. 7. Touch to switch among LEFT, RIGHT, STEREO. 8. Touch to display Sub-title 9.