Owner`s manual
SETTING THE “NIGHTTIME SETBACK” TEMPERA-
TURE
Default Settings: (moon), “--” (OFF)
• Press (large fl ame) button to
increase Nighttime Setback
Temperature.
• Press (small fl ame) button to
decrease Nighttime Setback
Temperature.
• Press OFF or simply wait to
complete programming.
• Briefl y press SET button to scroll to
TEMP (moon) mode. Hold
the SET button until the TEMP
fl ashes.
TEMP
TEMP
Remote Control Operation
SETTING PROGRAM TIMERS
• You can program two periods of time between 12:00
am and 11:50 pm in each 24-hour cycle.
• The Programs P1 and P2 must be set in the
following order during a 24-hour cycle: , ,
and .
• The icon indicates the beginning of the period (ON)
and the icon indicates the end of the period (OFF).
• If = or = , the programming
is cancelled.
• To keep the fi replace ON all night, set at
11:50 am and at 12:00 am.
Default settings:
Program 1: 6:00 am 8:00 am
Program 2: 11:50 pm 11:50 pm
• Briefl y press SET button to scroll
to TIMER mode.
• Hold the SET button until
(sun) is displayed and the time
fl ashes.
• Press (large fl ame) button
to set the hour.
• Press (small fl ame) button
to set the minutes.
SETTING P1 ON TIME
P1
P1
P1
P2
P2
P2
P2
P1
P1
P1
P1
P1
P2
P2
P2
13
OWNER’S
INFORMATION