Owner`s manual

17
Appliance Preparation


%ROWV
Appliance’s foot print
x 4
Detail
Window & Log Pack
1. Release the spring bolts at top and bottom of the
window by pushing and turning 1/4 turn.
2. Lift the window and set it aside in a safe place to
avoid damage.
3. Remove the log pack from inside the fi rebox and
set it aside with the window. Please handle the logs
carefully as they are made of fragile material and
can easily be damaged.
Casting Base
1. Rough-in the gas line and electrical wiring for a fan
(if any).
2. Decide where the stove should be positioned to
avoid moving it once all the casting pieces are
attached together.
3. Place the casting base upside down. Unscrew the
bolts to insert the legs.
4. Slide each leg under the head of its bolt.
5. Tighten the bolts securely with a wrench.
6. Fix the casting base to the fl oor or hearth using bolts
(not supplied) through the casting feet—see the
bolting pattern below. (Required for mobile homes
only).
The instructions in this manual cover installation
of the Madrona Traditional Stove (MF28 engine
+ MFCS01 or MFCS02 Traditional Castings).
For installation of the Madrona Contemporary
Stove (MF28 engine + MFCS04), use this
manual jointly with the instruction manual
provided with the MFCS04 kit.
INSTALLATION