Owner`s manual

Top Casting

Place the top casting piece on the top of the stove

ensuring the rear edge is ﬂ ush with the rear edge of

the cast side panels. Fill in the vent space with the

inﬁ ll plate if using a rear vent. To level the top casting,

unscrew the levelling bolts on the top rear of each

casting side panel as appropriate.

Front & Top Installation

Barrier Screen

Install the barrier screen to the front of the Madrona

stove.

1. Insert the top clip in the top of the opening of the

cast front.

2. Push the sides of the screen against the front so the

side clips hook to the front.

The instructions in this manual cover installation

of the Madrona Traditional Stove (MF28 engine

+ MFCS01 or MFCS02 Traditional Castings).

For installation of the Madrona Contemporary

Stove (MF28 engine + MFCS04), use this

manual jointly with the instruction manual

provided with the MFCS04 kit.

Removeable Fret

To access the gas valve and the remote control

receiver, the fret can be removed without removing the

front casting. Once the stove has cooled down and

with extra care not to hit the glass of the window,

simply slide the fret out of its brackets, angle it up

and remove it. To put it back in place, proceed in the

reverse order.

Hooks (2)

Fret Mounting

Brackets (2)

INSTALLATION