Owner`s manual

Remote Control Handset Wall Holder Installation

Packing Contents:

1 Wall Bracket A

2 Screws B

1 Screw C

2 Wall Anchor D

1 Spacer E

(detach before assembly)

1 Wall Bracket F

Switch Plate

Alternative 1

Alternative 2

Alternative 3

The remote ontrol kit for this ﬁ replace comes

complete with a wall-mounted holder. This

holder is not required in all installations but

is provided as an optional feature for those

customers who wish to mount the remote

handset to the wall. To install the holder

to the wall, ﬁ nd a convenient location and

use the hardware provided with the kit.

See the diagram for required hardware and

conﬁ gurations. Note that the holder can be

installed at the base of a light switch plate.

IMPORTANT: The location of the remote

control handset is important to assure

proper temperature regulation. To obtain a

constant temperature, we recommend that

the handset should be between 3 and 15 feet away from the appliance but not directly above it. We also advise

that the handset should be located away from any other heat source and not in direct sunlight as this may affect the

temperature sensor located in the remote handset.

INSTALLATION