Owner`s manual

Gas
inlet
position
3/8”
fem.
NPT
x
Gas
inlet
position
3/8”
fem.
NPT
x
Supplied
with top
vent; fi eld
convertible
to rear vent
9
Dimensions & Clearances
Inlet collar Ø
6-5/8”
Exhaust
collar Ø 4”
17-7/8”
28-1/2”
23”
7-1/2”
27-1/2”
14”
30-1/2”
25-1/8”
Center
line
Hearth Requirements
This unit is approved for mounting directly on
combustible wood fl ooring. If installed directly on
carpeting, vinyl or soft combustible fl oor other than
wood, it must be installed on a metal or wood panel
covering a minimum surface of 15 inches deep by
28 inches width.
Dimensions—Traditional Gas Stove MFCS01 and MFCS02
(for Dimensions of Contemporary Gas Stove MFCS04, see instructions provided with the MFCS04)
4”
The instructions in this manual cover installation
of the Madrona Traditional Stove (MF28 engine
+ MFCS01 or MFCS02 Traditional Castings).
For installation of the Madrona Contemporary
Stove (MF28 engine + MFCS04), use this
manual jointly with the instruction manual
provided with the MFCS04 kit.
INSTALLATION