NVG-720W
Contents Thank you for your choosing a Valor Multimedia product. We hope you will find the instructions in this user manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new unit for maximum enjoyment. After you have finished reading the instructions, please keep this manual in a safe place for future reference.
Preparation iPod Operation Accessing iPod Mode iPod Instructions Playback of video on iPod Sat Radio Operation Accessing Sat Radio Mode Auto Scan Manual Scan Storing a Channel Recalling a channel Bluetooth Operation Before using the Bluetooth The Bluetooth Indicator Accessing the Bluetooth Mode Bluetooth User Interface Phone Book Bluetooth Setup Pairing Auto Connect Making a phone call Answering an incoming call End a call Navigation Operation Access the Navigation mode Inavigation Operation How to Listen t
Controls and Indicators 6. To prevent injury from shock or fire, never expose this unit to moisture or water. 7. Never use irregular discs, the only recommended disc size is a 12cm round disc. 8. To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor. 9. Do not change the fuse on the power wire without professional guidance. Using an improper fuse may cause damage to the unit and result in a fire. 10. The monitor employs an automatic motorized mechanism.
12. SMART DIAL Rotary encoder. Press the encoder to access MAIN menu. Rotate clockwise/counterclockwise to select a desired item and press to access or confirm. Press to reject/end an incoming call while operating a phone source. 13. EJECT Press once to eject the disc. Hold to reset loading mechanism. 14. INFO Press to display playback information on the screen on DVD mode, if the TFT monitor is closed DVD playback information will display on the LCD screen. Press and hold to access the picture setup. 15.
Remote Control Front Zone Remote Control 3 2 4 1 6 Title Also can activate and disable SCAN mode while playing CD Root Enter the main menu of the disc Turn on PBC while playing VCD Repeat Repeat playback for current chapter Next Select the next chapter/track for playback Search an available radio station by increasing tuning frequency on tuner mode 5 7 Previous Select the previous chapter/track for playback Search an available radio station by decreasing tuning frequency on tuner mode 9 8
R-SRC Select rear playing sources Mute Directly access certain chapter / track / preset station in current band Toggle on/off audio output GOTO search Title Position search function on VCD/DVD mode Also can activate and disable SCAN mode while playing CD Root Enter the main menu of the disc Turn on PBC while playing VCD OK Start or pause playback, confirm settings Numeric button Direction buttons Up/down/left/right to select items for setting Previous Select the previous chapter/track for play
TFT Monitor Operation Open/Close TFT Monitor Press the ( monitor. Parameter Adjustment Procedure ) button on the front panel or on the front zone remote control to open/close the TFT Monitor Auto Open If “TFT Auto Open” is “On”, when the unit is turned on, the monitor automatically opens to the last viewing position, and closes automatically when the unit is turned off.
Operation Instructions Power On / Off Press the POWER OFF /VOL button to turn the unit on. The buttons on the front of the unit are illuminated and start up message is briefly displayed on the LCD screen, and then displays the current mode status. You can also turn on the unit by pressing the POWER button ( ) on the remote control. Press and hold the POWER OFF /VOL button on the front panel for more than 1 second or press the POWER button ( ) on the remote to power off the unit.
System Setup Menu Six-Channel Audio Control MAIN Menu 6-Channel Audio Adjustments Item Master Volume Front Left Channel Volume Front Right Channel Volume Rear Left Channel Volume Rear Right Channel Volume Center Channel Volume Subwoofer Volume 00 to 40 -10 to +10 -10 to +10 -10 to +10 -10 to +10 -10 to +10 -10 to +10 Rear Zone If a monitor is installed in the rear zone and connected to the rear zone AV output, passengers in the back seat can control the DVD output using the rear zone remote control.
Screen Setting Accessing the Screen Setup Menu •Press the SMART DIAL on the front panel or press the (MENU) button on the remote control to access MAIN menu. •Select the SCREEN SETUP button on the right bottom of the screen to access the Screen setup. Selecting a Feature for Adjustment Press the ( / ) buttons on the remote to select a feature to be adjusted. Rotate SMART DIAL clockwise/counterclockwise to select a feature to be adjusted.
Selecting a Feature for Adjustment Press the direction buttons on the remote control or touch the option directly on the screen to select a feature to be adjusted. Bluetooth Select to activate/deactivate the Bluetooth function. ASP(Audio Signal Processing) Configuration Menu The ASP Configuration menu allows you to make fine audio adjustment. Accessing the ASP Configuration Menu Press the MENU on the front panel or press the (MENU) button on the remote control to access MAIN menu.
10KHz Treble Freq 12.5KHz 15KHz Depending on the audio source, select the Treble Center Frequency to achieve the best Treble effect. 17KHz 160Hz Selecting a crossover frequency sets a cut-off frequency of the subwoofer’s LPF(low-pass filter) and the “SMALL” speakers’ HPF (high-pass filter). The Crossover frequency setting has no effect if the subwoofer is set to “Off” and any other speaker is set to “Large”.
Tuner Operation Tuner TFT Display Select FM/AM Band 6 1 Touch the button on the screen, or press the BAND button( change among the following bands: FM-1, FM-2, FM-3 and AM. 13 3 12 2 4 5 11 7 8 9 )on the remote control to Auto Tuning Press the button ( ) on remote control or touch the button on the screen to seek the next available channel by increasing the tuning frequency. Press the button again to stop searching.
DVD Player Operation Program Scan (PS) 1. Press and hold the AS/PS button on the panel Or press the button on the screen to automatic scan and store strong radio stations in the 12 preset channels in the current band. 2. Touch the button on the screen to automatically scan all stations in current band to preview stations. 3. Press any button to stop scanning and listen to the selected station.
1.Touch to Play/Pause 2.Touch to stop 3.Touch to fast reverse 4.Touch to fast forward 5.Touch to repeat playback 6.Touch to repeat from A to B. Select the repeat point A wherever you want to start and the point B wherever you want to end, then, DVD displays from A to B continually. 7.Touch to choose a language, if the disc is recorded in multiple languages. 8.Touch to display Sub-title 9.
GOTO Search Viewing an Alternate Picture Angle (DVD Only) During DVD or VCD playback, perform the following steps to use the GOTO feature to access a specific location on a disc: 1. Press the( -/--) button on remote control or touch Area F on the screen to enter “GOTO” mode. 2. Press the ( / ) buttons on the remote control to select a category. • For DVD mode, you can choose Time or Title/ Chapter search. • For VCD mode, press the( -/ --) button to choose between Track Search, Disc Search and Exit.
VCD Playback Information The following information is displayed at the top of the screen during VCD playback: User Level 2 Rear:Off 1.Indicates Current playing source. 2.Indicates the forth of 16 tracks on the DVD is currently playing. 3.Indicates the playback time of the current title. 4.Indicates EQ Setting. 5.Indicates the Loud Setting. 6.Indicates the current system time. 7.Indicates the current playback source of the rear zone.
DVD SETUP MENU In “DVD Setup” mode, “LANGUAGE”, “ASP SET”, “VIDEO”, “SPEAKER” “SURROUND” and “RATING” (parental lock) are available for setup. This operation can be performed using rotary encoder, the remote control or touch screen.
TV Shape (Aspect Ratio) 4:3 Image is presented in wide view with a 4:3 aspect ratio. 16:9 Image is presented in wide view with a 16:9 aspect ratio. Low pass 80Hz 120Hz 160Hz High pass 90Hz 135Hz 180Hz RATING (Parental Lock) Menu The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once setup, the parental lock is released only by entering the correct password.
CD/MP3/WMA/JPEG Operation Instructions for Insert/Eject, Play/Pause, Stopping Playback, Track Selection, Fast Forward/Fast Reverse, Scan, and Random Play are the same for DVD, CD and MP3 operation. Please see the DVD Player Operation section for information about these topics.
SD Card Reader Operation 7. : Touch to stop disc playback 8. : Touch to turn to the previous page 9. : Touch to turn to the next page 10. : Touch to display previous folder 11. : Touch to display next folder 12. : Touch to fast forward current track 13. : Touch to activate/deactivate Repeat Single Mode 14. : Touch to activate/deactivate Random Mode 15. : Touch to display the numeric keypad on the screen, and use it to access a track directly. 16.Current track /total tracks 17.Elapsed playing time 18.
iPod Operation Accessing iPod Mode 1.To switch to iPod mode, press the SRC button on the front panel or the (SRC) button on the remote control repeatedly until iPod appears at the top left corner of the screen. 2. Select the Main menu, then touch the iPod icon to select iPod as your source. According to the above instruction 16, when you press the display The following. button, the touch screen will iPod Instructions The touch keys on the screen for iPod playback are described below.
Sat Radio Operation Accessing Sat Radio Mode Manual Scan To switch to Sat Radio mode, press the SRC button on the front panel or the (SRC) button on the remote control until SAT appears at the top of the screen. The touch keys for Sat Radio playback are described below. NOTE: An optional Terk XM Direct Universal Tuner box(XMD1000) and XM Antenna is required to receive XM Radio, along with a subscription to XM Radio. Check with your dealer for these Optional devices.
Bluetooth Operation Before using the Bluetooth Before using the Bluetooth, it’s necessary to perform the following steps. For more operating details, refer to each section below. 1. Select the “Bluetooth” option in the General setup and select the “On” option to activate the Bluetooth feature. 2. Pair your mobile phone to this unit (refer to the “Pairing” operation). It is necessary to connect your phone to the unit. Without connecting, the Bluetooth is not available. 7.
Manual Connect Auto If this function is set to Auto, connection between the Last Used phone and this unit will take place automatically as soon as the devices are less than a few meters apart. Pairing Access the Bluetooth setup and press “Yes” option on the screen, then “Wait pairing” displays on the screen. Now you can pair a phone with the unit. This unit can pair with 4 mobile phones in all, but just one can be active at a time.
Navigation Operation 48 49 Turn TFT Auto Open on Check wiring and correct TFT Auto Open is turned off Incorrect connection to parking brake wire Monitor does not open automatically Stop vehicle in safe place and apply parking brake Check wiring and correct Incorrect connection between yellow memory wire and positive battery wire Unit resets itself when engine is off PRK SW is activated and parking brake is not engaged Check that “MUTE” connection is not grounded and that it’s properly insulated “
50 51 Use disc in good condition Clean disc with soft cloth Use compatible disc Disc is dirty or wet Clean disc with soft cloth Insert disc with label side up Disc is dirty illegal mechanism operation Error Remote control does not function Replace battery with new one Remove battery and install correctly Battery installed incorrectly Pull out the insulation tape Battery depleted Battery is covered with insulation tape DVD is not compatible with region code of unit Region Error Remote control Di
1. When using the remote for the first time, you must pull out the insulation tape. Insert the battery holder 2. Remove the battery if the remote control is not used for a month or longer. Remove and dispose of the old battery immediately. Do not store the battery with metallic materials. 3. Inserting/Replacing the Battery: Remove the battery holder NOTE: Use only one CR2025(3V) lithium battery. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Specifications Power Ratings Main Amplifier Power Output: 20 watts X 4 channels into 4-ohms @ < 10% THD+N Signal to Noise Ratio: 70dBA below reference. (Reference: 1 watt, 4-ohms) MAX Power: 50 X 4 watts into 4-ohms, all channels driven Frequency Response: 20Hz to 20 kHz, -3dB. Aux input used as source reference Reference Supply Voltage: 14.
