Owner`s manual

15
Ceramic Fuel Bed Installation
Ceramic Brick Liner Installation
Install the ceramic brick liner taking care not to damage them as the material is fragile. The top rounded edges of
the side panels should face inwards and the front edge bevelled. Place the side brick panels fl at against the side
of the fi rebox up high and slide downward into place behind the front return edge on the fi rebox.
Side Brick Behind
Firebox Return
Side Brick in front of Rear Brick
Rear Brick
Left
Brick
Rest Brick on
Rear Log Support
Rear Brick
Rear Brick
Left
Brick
Right
Brick
Top Convection Baffl e Installation
Position the fi rebox as far back as possible within the existing fi replace to allow ample space at front for the fret
and to allow convection air to fl ow under the smoke curtain of the existing fi replace. Position the top convection
baffl e with the threaded studs pointing downwards into the slots at the top of the fi rebox. Slide the convection
baffl e as far forward as possible, angled down if possible, to force the air under the smoke curtain, and tighten
the wing nuts.
Convection Baffle
Wingnuts (2)
Start wingnuts on studs. Slide
Convection Baffle into slots.
Adjust Baffle Forward to Touch
Back of Smoke Curtain of
Existing Fireplace. Tighten
Wingnuts.
Firebox Installation