Welcome Thank you for buying a Valor Multimedia overhead monitor with media player. Please read this manual carefully before using the overhead LCD Monitor with media player in order to get the most out of all the features and functions. Keep this manual in a safe place, as it can be a valuable tool in helping you to understand all the features and functions. Contents Safety information DVD player features. 3 Setting up your DVD player... Using your DVD player Basic Operation...
or servicing of the display by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards. Be careful not to drain the car battery while using the unit with the car engine stopped. To avoid draining the battery, it is suggested that the vehicle engine always is running while using the unit. Do not disassemble or alter the uniting any way.
DVD player features This player is a Roof Mount 9.2 TET-LCD Color Display with DVD player that can be used as a stand-alone display, or can be integrated into a mobile multimedia system. This player has the following features: Facsimileing wiglaigigligiigiigiinging 9.
Multi-angle Function = #5: A DVD video that is filmed from multiple angle which allows you choosing fo view from different perspectives. Subtitle Function & A DVD video can record subtitles for Up to 32 languages to choose from. DISC PLAYBACK This DVD player can play the following formats. 1558 video COs chem Sh GEE Audio con zoom ee =D Waco 12cm About CD Extra discs A CD Extra disc is a disc in which a total of two sessions have been recorded.
DISPLAY 1.2 34587 8910311121314 4 button {tem | Name Function or Control 1 Dome Light Provides an interior light for the vehicle. 2 Reset button Press with a pencil or other narrow-tipped tool to rest the player. 3 Power button Press to turn on or turn off the player 4 Menu button Press to open the TET menu. Press again to select a menu item. 5 SRC input source | Press to select the video input mode (DVD-IN US BI SDI MMC/ MS, AV INT, AV IN2,).
Item | Name Function or Control 1 Ml (SKIP+) button | Press to skip the next chapter on DVD or track on CD; Press and hold it to fast forward playback 16x and 32x speeds 12 Stop button Press to stop playback, press [PLAY] or [ENTER] button to start playing at the last position: Press [STOP] button twice to fully stop playback, Press [PLAY] or [ENTER] button fo start playing at the beginning of DVD. 13 MI play or Pause | Press fo play or pause a disc. 14 Eject button Press to eject the disc.
item Name Function or control Arrow and ENTER buttons Press to navigate in a menu and change setting values. 10 ER Press to fast reverse playback 16x and 32x speeds. 1 Random Press fo play chapters or {racks in random order, 12 AB Press to repeat playback from point A to point B. 13 SRC Press to select the video input mode (DVD-IN JUST/ SDI MCI MS, AV IN1, AV IN2)). (When the units sets in DVD mode, press it can change USB/SDIMMCIMS mode.
Setting up your DVD player PACKAGE CONTENTS Name of parts Quantity Player 1 IR remote control with battery AV cable ST4.2x16 screw CM 4x8 screw EEE a Metal mounting plate User's manual ig Rubber gasket 1 caution | Use only the contents of this package to install and use the DVD A player. Use of any accessories not provided with this player may result in damage to the player.
Installing your DVD player Note: Do not attempt to install or service your player by yourself. Installation or servicing of the player by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose yogi to the risk of electric shock or other hazards.
1. Battery + lead (Yellow) To connect the positive terminal of the car battery. 2, ACC Power Lead (Red) To ACC power lead powered when engine key position is ACC. 3. Ground Lead (Black) Connect the lead to a good chassis ground on the car. Make sure the connection is made to bare metal and is securely fastened | 4. Door wire This lead is to be connected to the door pin of the vehicle. This allows the dome light to be switched by opening or closing door. 5.
To install the player 1. Make sure that what kind of power system your car is. Please slide to’! at the left position if your Vehicle's power supply system is negative; Please slide to at the right position if your vehicle's power supply system is positive. Notes: 1.Please slide it to a side fully. 2. Do not slide this switch after Place it at a position. Otherwise, till be damaged. 2. To prevent short circuits, remove the key from the ignition and disconnect he terminal of battery. 3.
9. Attach the DVD player to the metal mounting plate using the CM 4x8 screws. Four CM4*8 screws 10. Reconnect the terminal of the battery. Notes: Always connect the red wire to the ACC of the ignition switch. Or the battery charge might be drained off prematurely. If the fuse is blown, first make sure that the cables have not caused a short circuit, and then replace the old fuse with a new one of the same ratings.
Using your DVD player Adjusting the DVD player To open the DVD player 1. Press Open Button to unlock the LCD panel. Yn OPEN BUTTON 2. Swing the DVD player downward fo the desired angle. Cation | Ethelred display opens to a maximum angle of 150° degrees. Do not attempt to open it further. 150% To close the DVD player ® Swing the LCD panel upward until you hear the lock click, close: CAUTION | Make sure that cords and other items do not get caught in the panel when you close it.
Using remote control 1. Pull out the battery holder, Follow the arrow 1 slide it to the right toward the battery while at the same time pull the battery holder away from the remote control. Place the battery, Place the new lithium battery with the side up. (The type of battery: Crd2025) sae 3: Push the holder back. Using the finger to push in the holder back until the locking sound is heard. 4. Aim the IR Remote Control directly at the DVD player. then press any button.
Replacing the battery if the remote control does not function, or if the operating range becomes reduced, replace the old battery with new one. Note | « Dispose used battery properly. « Do not misuse battery by shorting the positive + and negative terminal or put into fire which may cause the battery to explode, = Battery and battery holder can be a choking hazard. Keep the remote control away from young children.
Turning off the player Press the [( button again, the player will be turned off, 1.0 there ls a disc media in the player, it will continue playback from last position the next time you turn the player on, 2. DVD Disc cannot be ejected i player is switched off. Playing a disc 1.1 the input source isn't already set fo DVD-IN, press SRC bunion to change the input source to DVD-IN 2. Insert a disc to DVD into the disc slot on the right of the player.
Changing the audio language during Playback (Multi Audio} 1. Press AUDIO button to change audio track during DVD playback, The current audit language number, the total number of available audio channels (languages) and current language are displayed. 2.1 there are multiple languages are available, press AUDIO button again to cycle through the available languages. The audio display disappears automatically if AUDIO button is not pressed again within 3 seconds.
To repeat a custom segment: 1. During playback, press A-B to set the starting point "A". 2. Press A-B again to set the ending point 'B'. The player plays the segment between point A and point B repeatedly. 3. To cancel the repeat playback and resume normal playback, press A-B again. Changing Viewing Angle during Playback (Multi-Angle) To change viewing angle: 1. Press ANGLE button to cycle through available viewing Angles during DVD playback.
Playing MPI OD MP3 is a format for storing digital audio. An audio frack 1s compressed info the MP3 format with little loss of audio quality, while taking up much less disc space. This player can play CD-RURAL disc halt contain music MP3 files, When a MP3 disc Is inserted info the player, the menu strewn appears automatically. You can use the menu screen to select the folders and tracks you want, or the player plays the tracks in the order they were burned onto the dido.
3. Press the up or down button on the remote control to select a file, then press ENTER fo play the file. 4. Press the »Pl to move to the next file. Or press the #€ fo move to the previous file. 5. Press the < button to go fo the previous folder or to page up, or press the > button to page down. To repeat a file or folder of an MP3 disc: During MP3 playback, press the REPEAT button fo cycle through the available settings) = Repeat single---Repeats the current file.
Connecting to the USB storage 1. Inserting the USB storage info the USB socket of the main unit. 2. When the unit sets is in DVD mode. pressing SRC on the remote control for more than one second will change the mode from DVD to USB, then the main unit will read the contents of USB storage automatically. Note: 1. The USB terminal of the main unit only supports USB 1.1. 2. The USB player does not support all USB devices. Connecting to the memory card (SD/MMC/MS) 1.
System setup hanging the picture duality and setting the fréduedicy of EN transmitting Accessing the menu To adjust the picture, use the menu button to select the features you would like fo adjust. Adjustment selections are as follows. 1 Crass and hold MENU on the remote control for more than one second. The Operation Menu opens. 2.
Using FM transmitter To use the EM transmitter for audio: 1. Press and hold MENU on the remote control for more than one second. The Operation MENU opens. 2. Press MENU repeatedly to select FMT Freq, then press the < and > bunions fo change the frequency. 3. Exit the menu. 4. Tune your FM radio to match the frequency to the frequency you set in step 2 Audio from the player is received by the FM radio. Using the OSD menu Press SETUP on the remote control, the OSD menu opens.
Preference page TV. TYRE. Selects the TV system You can select from following: » PAL + AUTO + SCENT AUDIO; Selects the audio track language. You can select from following: + ENGLISH « FRENCH « SPANISH » GERMAN « CHINESE + RUSSIAN » THAI SUBTITLE! Selects the language of the subtitles displayed on the screen. You can select from following: + ENGLISH» FRENCH » SPANISH « GERMAN » CHINESE » RUSSIAN » THAI = OFF DISC MENU: Selects the language of the current disc.
Customizing DVD settings To set the general setup page: 1 Press SETUP button on the remote control. The DVD setup menu opens. 2 Press ¢ or» fo select General setup page, then the list opens. 3 Press the select the desired setting item. The items include TV. DISPLAY. ANGLE MARK, OSD LANG, CAPTIONS SCREEN SAVER and LOGO TYPE, 4 Press ENTER fo open the list, then press choose the setting values. 5 Press ENTER to confirm. 6 Press SETUP to exit the setup menu.
Troubleshooting If operation freezes, the screen goes black or the unit should otherwise not function properly, try turning the unit on and off. If the unit does not respond, press the reset switch on the Front Panel. Problem Cause Solution Player does not Disc inserted incorrectly Reinsert the disc with the label side up (facing the ceiling). play disc —_ is not Check the disc format. Disc is dirty or scratched | Clean or replace the disc. i af Try turning the player off hid Ki By and on.
Problem Cause Solution The picture on the screen is dark. 2. . The equipment locates at a low temperature area. Brightness is set too low. 1. This is the characteristics of LCD display in low temperature, it will restore to normal brightness after starting the display for few minutes. 2 Adjust the brightness setting. No sound can | 2. be heard from the IR wireless | 3. . Headphones are not turn on. The battery in the headphone is low. There is object blocking 1.Turn on the headphones.
Maintaining Handling discs » To keep a disc clean, do not touch the play side (belabor side) of the disc. = Do not attach paper or tape to the disc. GH %® = Keep the disc away from direct sunlight or heat source. = Store the disc in a disc case after playback. Cleaning discs = Before playback, wipe the disc outwards from the center with clean cloth. LCD Panel Maintenance * Wipe off any dust gently with a soft, dry cloth. * The surface is easily scratched; do not rub it with hard objects.