Use and Care Manual

Tips for Maintaining your Shower Panel

3.Thoroughly rinse the shower head or jet spray part with

warm water (see (c))

4. Reinstall the shower head or jet spray part. Turn on the

shower and allow the part to be flushed for about 1 minute.

1. If scale deposits are noticed in the jet spray nozzles, turn

the water on using a low flow setting and lightly rub the

rubber nozzles with your finger or a non abrasive sponge

or clean cloth (see (a))

(a)

3/4"

(b)

(d)

Scale Removal

2. If scales or deposits are stubborn or difficult to remove,

especially is present on the chrome plated surface of the

shower head or jet sprayers, please follow these steps:

a. pour approx. 1 cup of commercial scale remover such

as “LIME AWAY™” or CLRTM into a shallow dish.

b. dilute the scale remover with water as instructed in the

scale remover instructions.

c. remove the shower head or jet sprayer affected and

soak it face down in the scale remover solution for 2-5

minutes or as recommended on scale remover instructions

(see (b))

PAGE 1
Tips for Maintaining your Shower Panel Scale Removal 1. If scale deposits are noticed in the jet spray nozzles, turn the water on using a low flow setting and lightly rub the rubber nozzles with your finger or a non abrasive sponge or clean cloth (see (a)) (a) 2. If scales or deposits are stubborn or difficult to remove, especially is present on the chrome plated surface of the shower head or jet sprayers, please follow these steps: a. pour approx.
PAGE 2
Cleaning Recommendations Modern faucets and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage,it is necessary to use some caution when cleaning.Damage caused by improper treatment is not covered under the warranty. Cleaning Materials for Faucets and Showers • To remove lime scale,use only products made specifically for that purpose.Always follow the manufacturer’s instructions when using.