Installation Guide

35°
• Adjustable Jet Spray Nozzles
• Shower Head
60°
The shower head uses a ball-joint
and is capable of pivoting and
articulating at a base angle of 60
degrees due to ball joint
Through the ball body can be rotated 35 °.
* For Safety, it is highly recommended that you familiarize yourself with all applicable local plumbing codes before
installing this product.
125psi
50~80psi
psi ,125psi45
1 °F/9094 °C
~ 7.6°F93.2 10
<2.5gpm
Technical Data
Maximum operating pressure:
Recommended pressure:
Test pressure:
Max. hot water temperature:
Recommended hot water temperature:
Flow rate @ 80 psi:
How to use shower Head and Adjustable Jet Spray Nozzles
- 9 -
How to use the Temperature Control Knob
• Turn the knob counter-clockwise from the 12 o'clock position to open the valve.
Continuing to turn knob counter-clockwise increases the temperature of the water;
turning clockwise decreases the temperature; set the temperature as desired. Return
the knob to the 12 o'clock position to close the valve.
• The maximum water temperature output should be 194°F. We recommended hot water
temperature: 93.2°F to 107.6°F.
The maximum water temperature output should be1 . 94°F
Attention:
How to use the Temperature Control Knob:
150°