Installation Guide

• Loosen the nut securing the PVC Flexible hose to (#8)
the brass valve body.
• Disconnect the PVC hose from the valve body and
remove the Filter Gasket (#11).
• Using needle nose pliers, grip the edge of the check
valve and pull straight out..
2
3
Check Valve
1
• Place the new check valve into the valve body.
Observe the direction of the valve is correct.
2
4
Check Valve
2
2
11
2
• Ensure the check valve is ush with the top of the valve
body inlet.
5
Level
• Place the lter gasket (#11) back in place and secure the
PVC hose (#8) to the valve body to complete the install.
2
6
How to Replace the Check Valve
8
- 15 -
11
8