Installation Instructions

STEP FIVE: FINISHING TOUCHES
Nowthatthecabinetframesareinplace,it’stimeto
addshelving,lighting,drawers,andotheraccessories.
Allcabinetframeshavepre-drilledholesforquick
andeasyinstallationofshelving,drawersandother
interioraccessories.Thisalsomakesitsimpletomake
adjustmentsoraddaccessorieslateron.
INsTAll DooRs, DRAwERs, AND shElvEs
• Re-attachdoorstotheircabinets.
• Re-insertdrawerboxes.
• Insertshelfclipsatthedesiredheightandplace
shelves.
• Installtoekickandscribetocoverseams.
AlIGN DooRs AND DRAwERs (Figure1and2)
• First,makeanalcheckonsquarenessbyusinga
levelonallhorizontalandverticalcabinetsurfaces.
Ifanycabinetisoutofsquare,nowisthetimeto
correctit.Loosenfromthewallanduseshimsto
properlysquarethecabinet.
• Reinstalldoorsanddrawersandgetinperfect
positiontoaccepthardware.
• Ifdoorsdonotlineupvertically(upanddown)or
wheretheymeet(inthemiddle),adjusthinges.
ADjUsT hINGEs
Six-wayadjustablehinges(Figure3)
• f o r d e p t h a d j u s t m e n t s :loosenscrew1on
mountingplate,adjustdoordepthandtightenscrew.
• f o r h e i g h t a d j u s t m e n t s : loosenscrew2on
mountingplate,adjustdoorupordownandtighten
screw.
• f o r s i d e a d j u s t m e n t s : loosenscrew3attaching
hingetotheframeplate;tightenwhentheproper
positionsachieved.
Ovencabinethinges(Figure4)
• f o r s i d e a d j u s t m e n t s : loosenscrews1onhinge,
adjustthedoorleftorrightandtightenscrew.
• f o r h e i g h t a d j u s t m e n t s :loosenscrews2ondoor,
adjustdoorupordownandtightenscrew.
Easyreachhinges(Figure5)
• f o r s i d e a d j u s t m e n t s:locatetheconcealedphillips
headscrew2.Turntodesiredadjustment.
• f o r h e i g h t a d j u s t m e n t s :loosenscrew1onhinge
plate,adjustdoorupanddownandtightenscrews.
• f o r f o r w a r d a n d b a c k w a r d m o v e m e n t :adjust
phillipsheadscrew3attheendofhingearm.
STEP FIVE: FINISHING TOUCHES
Figure5
1.
2.
3.
Figure4
1. 2.
1.2.
3.
Figure3
Figure2
Figure1