Datasheet

VALUE LANtest Multi-Network Cable + PoE Tester
Product No. 13.99.3003
Manufacturer VALUE
Manufacturer No. 13.99.3003
EAN (single piece) 7611990133062
󰿃 Continuity testing of coax cables with BNC connectors and 8-pole data lines w. fitted RJ-45
connectors
󰿃 The device recognises open and short-circuited (wire/wire or wire/shield) connections
󰿃 A two-line display (LEDs) indicates sequentially which pin of the RJ-45 connector at cable
end A is connected with which pin at cable end B and manual or automatic switch advancing
is possible; in the case of a short-circuit more than two LEDs light up simultaneously
󰿃 The device has 2 RJ-45 sockets; with the supplied Remote Kit cables laid in the wall can
also be tested
󰿃 Two adapter cables (BNC/RJ-45) are supplied for testing coax cables
󰿃 PoE check - the PoE Finder allows the newtork administrator to find out if a network cable
is supplied via PoE. Just plug in the network cable that has to be tested. The LED of the PoE
finder will shine if the cable is supplied with power.
󰿃 Battery (not included in delivery): 1x E-block 9V (6LR61/AM-6)
Technical specifications
Manufacturer VALUE
Product group Tester
Product type Cable tester
Colour various
Accessories:
rechargeable battery
optional
not applicable