HOME THEATER S-VGA Splitters with Audio Vanco Part Number: 280448 (1x8) 280444 (1x4) 280442 (1x2) Technical Support www.vanco1.com • info@vanco1.
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. These VGA splitters distribute the input VGA video and stereo audio signals in to two, four, or eight identical outputs simultaneously depending on the model. These products have the ability of buffering and amplifying the VGA signals.
FEATURES S-VGA 1x4 Splitter with Audio Part # 280444 • Use to Duplicate and Amplify VGA and Audio Signals from a Single Source to Four Monitors or other Display Devices • Enhances Video Signals for Long Distance Broadcast up to 164 ft (50m) • Supports VGA, SVGA, XGA, SXGA, UXGA and Multi-Sync Compliant Monitors • Supports Video Resolutions up to 1920x1200 at 60 Hz • Supports Two Channel Stereo Audio, Bandwidth: 30 KHz • (1) Input Connector: HD-DB15 (15 Pin) Female Jack and 3.
SPECIFICATIONS Signal Inputs/Output Input video Signal........................................................ 1.2 volts p-p Maximum Single Link Range......................................... 1920X1200,1080p Operating Frequency Vertical Frequency Range............................................ 30-170 Hz Video Amplifier Bandwidth........................................... 500MHz Input/Output connector Input......................................................................... VGA 15pin male Output......
CONNECT AND OPERATE 1. Connect the supplied VGA cable from the VGA source into the VGA input of the splitter. 2. Connect stereo audio cable from audio output of the source into the audio input of the splitter. The audio cable is not supplied with the splitter 3. Connect VGA cables (typically male/male) from the displays into the VGA outputs of the splitter. 4. Connect stereo audio cable (typically male/male) from audio receiver into the audio output of the splitter. 5.
280448 - Front and Back LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects. The manufacturer of this product cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. It is the responsibility of the user and installer of the hardware to check that it is suitable for their requirements and that it is installed correctly. All rights are reserved.
LIMITED WARRANTY With the exceptions noted in the next paragraph, Vanco warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of one year from the date of purchase. Should this product, in Vanco’s opinion, prove defective within this warranty period, Vanco, at its option, will repair or replace this product without charge. Any defective parts replaced become the property of Vanco.
Vanco® International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.
