HOME THEATER HDMI® Matrix Selector Switches Vanco Part Numbers 280719 (4x4) 280716 (4x2) 280717 (2x4) Technical Support www.vanco1.com • info@vanco1.
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters. WARNING 1. Do not expose this unit to water, moisture, or excessive humidity. 2.
FEATURES Super IR Control These units have the capability of being controlled via IR signals. The switch can be controlled from the display. This is accomplished by using an optional IR Receiver pigtail (Part # 280721) pointing away from the display(s), which can be connected with the optional IR Adapter (Part # 280703), and inserted between the HDMI cable connector and the display with the toggle switch at the “IR” position.
HDMI® 4 x 2 Matrix Selector Switch with IR Control Part # 280716 • Allows 4 HDMI Sources to be shown on up to 2 HDMI Displays Independently • Unique Circuit Design Allows for Protection against High Voltage and Peak Currents • High Speed Chip Set that Supports 3D, 4K x 2K • Full HD1080P/60HZ • Tested for Compatibility with all leading HD Video brands • HDCP Compliant • Tested with Dolby 7.
SPECIFICATIONS HDMI version............................................................. HDMI v1.4 with 3D HDCP version............................................................. HDCP1.2 Support HDMI resolution............................................. 1080P/1080i/720P/576i/480P/480i Support video color bit................................................ deep color 24bit/36bit Support Audio Format................................................. LPCM/Dolby-AC3/DTS7.1/DSD Input Video signal.............
CONNECT AND OPERATE Connect the signal source such as Blu-Ray Player, Play Station 3, audio/video receiver, cable or satellite receivers and computers equipped with HDMI output interfaces with a short high-speed HDMI cable to the HDMI matrix switch input. Connect the matrix switch output HDMI ports, starting with port 1, to high-definition display devices such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces.
CONNECTION DIAGRAMS Super IR Control System Over HDMI Cable Blu-Ray Player HDMI HDMI IR Adapter HDTV HDMI IR IR IR TX Pigtail Matrix, Splitter, or Switch (1 per display for Matrix, Switches, Extenders 1 per source for Splitters) IR Remote IR RX Pigtail 800-626-6445 7
280719 PRODUCT IMAGES 280716 PRODUCT IMAGES 8 www.vanco1.
280717 PRODUCT IMAGES 800-626-6445 9
TROUBLE-SHOOTING 1. Best results are usually achieved when the source and display resolutions are the same. If resolutions differ, the matrix switch will try to adjust the signal to match the resolution of the HD TV with the lowest resolution. This will result in a picture with a lower resolution on the other HD TV sets. 2. If you do not get audio and video see if you can use the “set-up” menu on the TV to adjust the audio settings and the video settings.
LIMITED WARRANTY With the exceptions noted in the next paragraph, Vanco warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of one year from the date of purchase. Should this product, in Vanco’s opinion, prove defective within this warranty period, Vanco, at its option, will repair or replace this product without charge. Any defective parts replaced become the property of Vanco.
Vanco® International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.
