Specifications

www.vanco1.com
800-626-6445
3
FEATURES
Super IR Control
These units have the capability of being controlled via IR signals. The switch can be controlled from the
display. This is accomplished by using an optional IR Receiver pigtail (Part # 280721) pointing away from the
display(s), which can be connected with the optional IR Adapter (Part # 280703), and inserted between the
HDMI cable connector and the display with the toggle switch at the “IR” position. The IR Transmitter pigtail
(Part # 280720) is then connected to the switch and pointed at the source(s). A remote control is used at the
display to select the switch inputs and outputs.
*** These products are only compatible with Vanco’s Super HDMI IR Accessories.
Over-Current Over-Voltage Protection
The circuit boards are equipped with both over-current and over-voltage protection and automatically power
down if these are encountered. The power circuit will restore itself automatically once the excessive current or
voltage conditions are rectied. RS-232 capability for controlling larger systems is included.
HDMI® 4 x 4 Matrix Selector Switch with IR and RS232
Control
Part # 280719
• Allows 4 HDMI Sources to be shown on up to 4
HDMI Displays Independently
• High Speed Chip Set that Supports 3D, 4K x 2K
• Full HD1080P/120HZ
• HDCP Compliant
• Super IR & RS232 control system, IR transport
channel can be forward or backward, an IR
adapter and transmit and receive pigtailsare
needed
• Supports Digital Audio Format, DTS-HD/Dolby-
True HD/LPCM7.1/AC3/DTS/DSD
• Built-in equalization support output
• Unique Circuit Design Allows for Protection
against High Voltage and Peak Currents
• Tested for Compatibility with all leading HD
Video brands
• Tested with Dolby 7.1 Home Theater Systems
• Locking HDMI Compatible
• Shelf or Wall Mounting
• 5V DC, UL Listed Power Supply
• Dimensions: 12.25”W x 1”H x 6.5”D