User's Manual

www.vanco1.com

800.626.6445

INTRODUCTION

FEATURES

4K HDMI® over Single Cat5e/Cat6 Cable Extender

Part # EV4K2006

• Allows HDMI audio/video signals to be transmitted using a single Cat5e or Cat6 Cable

• Transmission Range: Extends 4K@60Hz, 4:4:4 Chroma up to 164ft/50m and 4K@30Hz, 4:4:4 Chroma

and HDR up to 130ft/40m over a single Cat5e/6 cable

• Features Power over Ethernet (PoE) Technology which transmits power over Cat5e/Cat6, allowing the

transmitter and receiver to be powered off of a single power supply

• Wideband Bi-directional IR system allowing for control of source or display (IR accessories included)

• Wideband IR signal from 20KHz to 60KHz

• Features Auto EDID and EQ Management for plug and play installation

• HDR10 Compatible

• Works with HDMI and HDCP compliant devices

• HDCP 2.2 compliant

• Slim and compact design

• Pure uncompressed 7.1ch digital audio

• Supports DTS-HD and Dolby TrueHD high bit rate audio

• Dimensions: 2.7” (68.58mm) W x .7” (17.78mm) H x 3.25” (82.55mm) D

The Evolution by Vanco EV4K2006 HDMI Extender over Single Cat5e/6 with Bi-directional IR, auto EDID/EQ, and Bi-directional

PoE extends 4K ultra high denition video with HDR and audio signals, IR, and power. Extends 4K@60Hz, 4:4:4 Chroma

Subsampling and HDR up to 164ft/50m, and 4K@30Hz, 4:4:4 Chroma Subsampling, and HDR up to 130ft/40m. Bi-

directional Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver

to be powered without the use of a power supply. No EDID or EQ adjustments are necessary as the units automatically

adjusts for compatibility and gain. This extender set also features a newly redesigned slim and compact chassis for easy and

exible installations. This product fully supports DTS-HD and Dolby TrueHD audio formats and is HDCP compliant. In addition,

bi-directional IR pass-through allows for source or display control. For extending HDMI over a single Cat5e/6 with IR at a long

distance, with Power over Ethernet, the EV4K2006 is a great plug and play solution!

The EV4K2006 includes two units: transmitting unit (EV4K2006-TX) and receiving unit (EV4K2006-RX). The transmitting unit

is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving

unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EV4K2006 offers the most

convenient solution for HDMI extension over a single Cat5e/6 with Power over Ethernet and is the perfect solution for any

application.