User Manual
www.vanco1.com
800-626-6445
3
FEATURES
The Vanco HDWIRKIT/RX extends HDMI signals wirelessly from a source to a display up to
131ft/40m using wireless technology. There are no cables that are required between the
transmitter and receiver which makes for a clean and easy installation, especially where cabling
is difcult or impossible to run. Using a 5GHz operation frequency, the HDWIRKIT Transmitter
and Receiver do not require line of site transmission, the wireless signal will travel through most
obstacles with no issues. Out of the box, the HDWIRKIT works as a point to point conguration,
however also supports having multiple sets on the same site (up to 10) and one to multiple (1 TX
to up to 4 RX) displays using HDWIR-RX receivers (sold separately). A great solution for splitting
a single source signal wirelessly. Also features dual band IR call back to control the source from
any display location connected. With the ability of sending HDMI signals wirelessly, whether point
to point or splitting to multiple displays, the HDWIRKIT and optional HDWIR-RX are easy solutions
where running cable is an issue.
HDMI® WIRELESS EXTENDER/RECEIVER
Part # HDWIRKIT (transmitter and receiver)
Part # HDWIR-RX (receiver only)
• Extends HDMI signals wirelessly up to 131ft/40m
• Transmits up to 1080p HD video and audio
• Kit includes both Transmitter and Receiver for point to point application
• Able to split wireless HDMI signals to up to 4 displays (additional HDWIR-RX receivers sold separately)
• Multiple kits able to be installed in one application without interference
• Perfect solution where cabling cannot be run such as a mantle or outdoor application
• IR pass-through to control source from display location wirelessly
• Wireless 5 GHz frequency
• No line of sight installation required, wireless signal will pass through most obstacles
• Easy manual front panel or IR setup for multiple units
• Dimensions: 5.25” W x 0.75” H x 3” D