DIGITAL TO ANALOG CONVERTER WITH DOLBY DOWNMIXING PART NUMBER DAC-DD CONVERTS DIGITAL COAXIAL OR OPTICAL TO ANALOG AUDIO VIA DUAL RCA STEREO OUTPUT pulseaudio1.com | vanco1.com | 800.626.
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. THIS PRODUCT IS 100% INSPECTED AND TESTED IN THE UNITED STATES TO VERIFY PERFORMANCE PARAMETERS. WARNING 1. Do not install or place this unit in a built-in cabinet, or other confined space without adequate ventilation. 2.
FEATURES The PulseAudio DAC-DD Digital to Analog Converter with Dolby Downmixing converts either digital coaxial or optical to analog audio via dual RCA stereo output. Stereo output signals can then be fed to external devices such as an audio system, recording device, or powered speakers via standard phono style (RCA) jacks.
PANEL DESCRIPTIONS Front Panel 2 1 1. Coaxial digital audio input (RCA) 2. Optical digital audio input NOTE: The DAC-DD will select from whichever digital input is connected. If both digital inputs are connected simultaneously, then the digital coaxial input will be the default and will take priority. Back Panel 1 2 1. 5V DC power input 2. Power indicator light: illuminates when powered on 3.
CONNECT AND OPERATE Streaming Box BluRay® Player Toslink Cable Coaxial Cable Amplifier Before installation, please make sure all devices you wish to connect have been turned off 1. Connect the audio source device to the DAC-DD using an appropriate toslink or coaxial cable 2. Connect the AV Receiver or amplifier to the DAC-DD using dual RCA stereo cable 3. Insert the DC side of 5V power supply into the DAC-DD and then connect the AC side of the power supply into the wall outlet 4.
SAFETY AND NOTICE The DAC-DD has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the DAC-DD should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects. The manufacturer of this product cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. It is the responsibility of the user and installer of the hardware to check that it is suitable for their requirements and that it is installed correctly. All rights are reserved.
Vanco ® International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 | fax: 630.879.9189 visit: www.vanco1.com A brand from Learn more at vanco1.
