User Manual

Instruction:
1) Before use, please check if the product is in good condition, if any defects were found, please stop using the product
immediately.
2) Plug the Type C connector into Type C port of your electronic devices, make sure it stay plugged in and won’t fall out of
your electronic devices. Then plug the USB A connector into wall charger or outlet.
3) If your electronic devices are fully charged, plug out the connector from your electronic devices and remember to
switch off the power source that connected to the USB A connector.
4) USB 2.0A enables fast 480Mbps data transfer, backwards compatiable with older version.
5) Please use a dry towel or tissue to clean the product.
Warning:
1) Do not use a unmatched or defective wall charger or adaptor to connect with the product. e.g. Input current of wall
charger > Input Current Max of the product
2) Avoid from water, sun exposure, hot or cold temperature