User Guide

Digtal voice recoder
14
As shown in the figure above, the 0
behind Vor: means that the voice
activation function is disabled. To
enable this function, please replace 0
with any number from 1 to 10. Please
note: the smaller the number to be
replaced, the louder the sound to
trigger voice activation, and the larger
the number to be replaced, the desired
sound the smaller.
Advice:0
5. Bit means setting the recording bit
rate: Bit: followed by 3, means the
recording file bit rate is 192Kbps, if
you set it to 1, it means 64Kbps, 2