Installation guide

8. SERVICE PARTS
ITEM DESCRIPTION QUANTITY VÄNEE 90H VÄNEE 190H
1MOTORIZED DAMPER ASSEMBLY (INCLUDING 18) 1 17235 17235
2DOUBLE COLLAR PORT 2 02257 02257
3HINGE ASSEMBLY (KIT) 1 13036 13036
4DOOR ASSEMBLY (INCLUDING 3 AND 5) 1 12350 12350
5
D
OOR LATCHES (KEEPER) 2 00887 00887
AND SCREWS 4 00601 00601
6BALANCING DAMPER 2 02253 02253
7BALANCING DOUBLE COLLAR PORT 2 02256 02256
8DRAIN CONNECTOR KIT 1 03203 03203
9SMALL BASIC FILTER 1 09300 09300
10 HEAT RECOVERY CORE 1 03311 03311
11 BASIC FILTER 2 02300 02300
12 BLOWER ASSEMBLY (INCLUDING 12) 1 17236 17237
13 SQUARE DAMPER KIT 1 17243 17243
14
D
OOR LATCHES 2 00886 00886
AND SCREWS 4 00601 00601
15 DAMPER NO 1 (KIT) 1 17245 17245
16 TRANSFORMER 1 17244 17244
17 CAPACITOR 7.5 µF 1 17240 17240
18 ELECTRONIC BOARD 1 17241 17241
19 T
HERMISTOR KIT 1 17242 17242
- 15 -
VL0039
1
2
14
3
12
15
4
7
8
9
13
5
6
11
10
3
16
18
19
17
REPLACEMENT PARTS AND REPAIR
In order to ensure your ventilation unit remains in good working condition, you must use vänEE genuine replacement parts only.
The vänEE genuine replacement parts are specially designed for each unit and are manufactured to comply with all the applicable
certification standards and maintain a high standard of safety. Any third party replacement part used may cause serious damage and
drastically reduce the performance level of your unit, which will result in premature failing. Also, vänEE recommends to contact a
certified service depot for all replacement parts and repairs.