User manual

3-18 Vanguard 7300 Installation
Installing the Vanguard 7300 in a Rack
Version 2 Rack-
mounting
Use these steps for rack-mounting a 7310 and 7330 Version 2 Series router:
1) Remove the front covers. (See the “Removing And Replacing Vanguard 7300
Front Covers” section on page 3-8.)
2) Two people are required to position the chassis and slide it into the front of the
rack.
3) Attach the front of the chassis to the rack:
• Secure the Vanguard 7310 and 7330 Version 2 with mounting hardware at four
locations, two on each side of the front panel (Figure 3-12)
Figure 3-12. Rack Mount Hardware Locations - Vanguard 7310 and 7330
Version 2