Installation manual

Part No. T0249-01, Rev A
April, 2002
Known Software Limitations Page 35 of 55
Voice Server Card Removal - Vanguard 7300 Series
If the voice server card is removed from the T1 card and there is a voice
configuration in the node, the node will not boot. (DRCaa22978)
Workaround: Delete the voice configuration or default the node before removing the
voice server card.
Vanguard 7300 Series BGP Initial Configuration
The initial configuration of BGP requires a warm boot. (DRFaa19411)
Workaround: At present, there is no workaround.
Vanguard 340, 7300 Series Audio on the FXS port
Passing 6.3k audio on three of the four ports on the quad FXS card causes MIPS
errors. MIPS errors are causing static on the output audio. (DRCaa23051)
Workaround: At present, there is no workaround.
Vanguard 7300 Series, DSP Configuration Crash
A DSP failure occurred when using a certain configuration. The failure occurred
when using a certain T1/E1 card, DSPM daughtercard and voice calls were discon-
nected. (DRCaa23026)
Workaround: At present, there is no workaround.
Vanguard 7300 Series Token Ring Additional Time Added to Node Boot
If a Vanguard 7300 Token Ring Port is not connected, an additional forty seconds is
added to the node boot time. (DRFaa19446)
Workaround: Change the port type to NULL for unused Token Ring Ports.