Manual

Accu-Trans Operating Procedures
7
4.0 PRETEST SETUP
4.1 Operating Voltages
The Accu-Trans operating voltages are
selectable between 90-130Vac, 50/60Hz or
200-240, 50/60Hz. Voltage selection is set
by the placement of jumpers on the power
terminal block as listed in Table 2.0 below
and Figures 2.0 and 3.0.
Table 2.0 Voltage Selection
VOLTAGE SELECTION TERMINAL BLOCK JUMPERS
90-130Vac Brown to Blue & Yellow to Green
200-240Vac Blue to Yellow
Figure 2.0 90 to 130Vac Jumper Setting
Figure 3.0 210 to 240Vac Jumper Setting
120Vac Jumper Installation
220Vac Jumper Installation