User guide

REV 2 ATRT-03 S2, ATRT-03A S2, AND ATRT-03B S2 USER’S MANUAL

3.5.2. Restoring a Test Record From Flash EEPROM

Use the steps below to restore a test record from the ATRT-03 S2’s Flash EEPROM to the

working memory:

a. Start from the “START-UP” menu:

Press the [2] key (SETUP).

b. The following screen will be displayed:

ATRT-03 S2 and ATRT-03A S2 ATRT-03B S2

Press the [4] key (SAVE/RESTORE RECORD).

c. The following screen will be displayed:

Press the

[1] key (RESTORE RECORD).

1. RESTORE RECORD

2. SAVE RECORD

3. RECORD DIRECTORY

4. ERASE RECORD

1. RECORD ID

2. TEST VOLTAGE

3. DISPLAY RECORD

4. SAVE/RESTORE RECORD

5. SET TIME

1. RECORD ID

2. TEST VOLTAGE

3. PRINT RECORD

4. SAVE/RESTORE RECORD

5. SET TIME

1. RUN TEST

2. SETUP

3. TEST PLANS

4. DIAGNOSTIC

TIME: 15:45:15

DATE: 07/20/10