Manual

REV 7 ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL
70
e. The following screen will be displayed:
1. ENTER PLAN NUMBER
Press the [1] key (ENTER PLAN NUMBER) if you know the test plan number that
you would like to use. The following screen will be displayed:
Type the test plan number to load from the unit’s Flash EEPROM and then press
the [ENTER] key. The test plan will be loaded and you will be returned to the
“START-UP” menu. Continue to step f to perform a test using the loaded test
plan.
2. SCROLL TO SELECT
Press the [2] key (SCROLL TO SELECT) to scroll through a directory of the test
plans stored in the unit’s Flash EEPROM. The following screen will be displayed:
Press either the [PAPER ∧ Contrast] or [PAPER ∨ Contrast] key to scroll
forward or reverse through the test plan directory. The test plan header will be
displayed:
Continue to press the
[PAPER ∧ Contrast] or [PAPER ∨ Contrast] key
until you have located the test plan that you would like to use, and then press
the [ENTER] key. The selected test plan will be loaded and you will be returned
to the “START-UP” menu. Continue to step f to perform a test using the loaded
test plan.
1 Y-DELTA TAPS:20
Siemens
TEST PLAN DIRECTORY
“UP” TO SCROLL FWD
“DWN” TO SCROLL RVS
LOAD TEST PLAN
NUMBER:
LOAD TEST PLAN
1.ENTER PLAN NUMBER
2.SCROLL TO SELECT