Instruction Manual

DIGITMR S2 USER’S MANUAL REV 1
95
e. The following screen will be displayed listing the first test plan:
Press the
[∧] or [∨] key to scroll through the list of stored test plans. Press the
[ENTER] key when you have found the test plan that you would like to print.
f. The selected test plan will be printed and you will be returned to the “START-UP” menu.
A typical test plan printout is shown in Figure 24.
Figure 24. Typical Test Plan Printout
TEST PLAN #: 01
145PMI 40-20
ABB
"UP" OR "DOWN"
TO SCROLL...
"ENTER" TO SELECT