Instruction Manual

DIGITMR S2 USER’S MANUAL REV 1

3.4.5. Setting the Frequency

Follow the steps below to set the frequency (50 or 60 Hz):

a. Start from the “START-UP” menu:

Press the

[3] key (SET-UP).

b. The following screen will be displayed:

Press the

[5] key (NEXT PAGE).

c. The following screen will be displayed:

Press the

[3] key (SET 50/60 HZ).

d. The following screen will be displayed:

Select the preferred frequency by pressing the corresponding key on the keypad ([1] for

50 Hz or

[2] for 60 Hz). The frequency will be set and the following confirmation screen

will be displayed:

1. SET 50 HZ

2. SET 60 HZ

1. SET DATE & TIME

2. SET PRINT MODE

3. SET 50/60 HZ

4. SET LANGUAGE

5. BLUETOOTH DEV RESET

6. PREVIOUS PAGE

1. ANALYSIS POINTS

2. MEASUREMENT UNITS

3. SAVE / RESTORE

4. SHOT DESCRIPTION

5. NEXT PAGE

1. TIME BREAKER

2. GET RESULTS

3. SETUP

4. DIAGNOSTICS